Manual

3
Note -Power Delivery /QC3.0, 2.0
•Plug &GO: no additional softwarerequired,
simply plug in and start:
Thanks to Power Delivery /QC3.0, 2.0, the
voltage and power areadjusted automatically.
•Beawarethat, for ecient and optimised
charging, your terminal device must support the
PD (Power Delivery)/QC 3.0, 2.0 function.
•Ifyou have alarge number of PD/QC-enabled
devices with different rmwareupdates, it may
be that the function is not fully supported.
Warning
•Only operate the product from asocket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
•Disconnect the product from the power supply
using the On/Off switch –ifthis is not available,
unplug the power cordfromthe socket.
•Ifusing amulti-socket power strip, make
surethat the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
•Ifyou will not be using the product for a
prolonged period, disconnect it from mains
power.
Unless different instructions have been expressly
given in the operating instructions for the devices
you arecharging, proceed as follows:
•Connect your device to the USB charging socket
using asuitable USB cable.
•Connect the charger to aproperly installed and
easily accessible mains socket.
•The charging process is displayed on your device.
•Disconnect the device from the charger if you wish
to interrupt the charging process or when the
device is fully charged.
•Then disconnect the charger from the line
connection.
When charging the rechargeable batteries in the
device, note the maximum charging times for the
built-in batteries.
5. Care and maintenance
•Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.
6. Technical data
Specications according to
Regulation (EU) 2019/1782
Brand name,
commercial register
number,address
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim,
Germany
Model identier 00201653
Input voltage 100 –240V
Input AC
frequency
50 /60Hz
Output voltage /
output current /
output power total
5.0VDC/ 3.0A/ 15.0W
9.0VDC/ 3.0A/ 27.0W
12.0VDC/ 3.0A/ 36.0 W
15.0VDC/ 3.0A/ 45.0W
20.0V DC/2.25A/ 45.0 W
3.3-16.0V DC/3.0A/
9.9W-45.0W
3.3 -21.0VDC/2.25A/
7.425W-45.0W
Average eciency
during operation
78.6%
Eciency at low load
(10%)
77.2%
Power consumption
at zeroload
0.10W
7. Warranty disclaimer
Hama GmbH &CoKG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failuretoobserve the operating
instructions and/or safety notes.