Owner's manual

33
Additional Information
Troubleshooting (Main Unit)
The unit does not switch on.
Make sure it is plugged in.
Press the ON/OFF button on the remote control or the ON/STANDBY button on the front of the unit.
The device switches off spontaneously.
The device switches off automatically when it is in STOP mode for more than 30 minutes without any user
intervention. Switch it on again. It is impossible to read the disc.
Insert the disc with the printed side facing up.
Check that the disc can actually be played by this device.
Check that the disc’s regional code matches the player’s regional code. This player’s regional code is 1.
Clean the disc.
There is no picture.
Check you have switched on the TV set.
Check the connections (see pages 4).
Select the AV input assigned to the player on the TV.
The video color is wrong.
Make sure you have the correct video setting selected.
The picture is of poor quality (with snow or lines).
Check the connections.
There is no sound or the sound is of poor quality.
Check the connections.
Make sure the speakers are connected.
Make sure the MUTE function is not on.
No surround sound.
Check the speaker confi guration in the Speaker Setup menu.
I can’t fi nd my fi le in the WMA/mp3/JPG listing.
Make sure the fi lename is valid.
The remote control does not work or works only intermittently.
Check that batteries are inserted or change them.
Aim the remote control at the unit. The infrared beam must not be blocked or interrupted.
Check that the remote control is confi gured to control the device you are trying to operate with it.
The subtitles do not appear.
Check that the DVD disc provides subtitles.
Refer to the section on how to display subtitles.
The disc menu language is not the correct one.
The disc menu language has not been set up.
The language of your choice is not available on the disc.
You have forgotten your password (Parental control).
Use the super password: 9688.
00055455bda2.indd Abs2:33
00055455bda2.indd Abs2:33
07.08.2007 15:07:26 Uhr
07.08.2007 15:07:26 Uhr