Specification
This water cooler is certified to
NSF/ANSI 61.
GENERAL
Modular, electric refrigerated, bi-level
wall-mounted water cooler designed to be
easily accessible to physically challenged and
able-bodied individuals. When properly installed,
unit meets state and federal requirements as
defined by the Americans with Disabilities Act.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
and 90° F ambient.
FOUNTAIN
Oval shape fountain, non-corrosive stainless
steel, with brushed satin finish. Contour-formed
basin with rounded corners and edges. Oval
fountain shape requires less neck extension and
bending for the wheel chair user.
BUBBLER
Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
PUSHBAR ACTUATION MECHANISM
Self-closing, semi-circular push bar can be
actuated at any point on its 180° radius.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
protection, efficient capillary sizing, large
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.
MOUNTING FRAME
Mounting frame is manufactured of corrosion
resistant, galvanized steel. Open construction
designed for ease of installation. Mounting
frame can be shipped in advance for rough-in
installation.
PANELS
Constructed of stainless steel number 300
series with satin finish. Removable lower panel
provides access to plumbing and refrigeration
system. Panels overlap wall opening
1
/
2
"
.
SUGGESTED SPECIFICATIONS
Shall deliver 7.5 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Fountain shall
include pushbar valve on front, contour-formed
basin to eliminate splashing and standing
water, and rounded corners and edges.
Bubbler shall be chrome plated, two-stream,
mound- building type. Cooling unit shall have a
high efficiency positive start compressor using
R134A, with pressurized counterflow cooling
evaporator/chiller. Cooler shall comply with
ANSI 117:1 and ADA for visual and motion
disabilities. The manufacturer shall certify the
unit to meet the requirements of NSF/ANSI 61,
and the Safe Drinking Water Act. Unit complies
with ARI Standard 1010.
NOTE: Continued product improvement
makes specifications subject to change
without notice. See Halsey Taylor website
for most current spec sheet.
Standard finish is Stainless Steel
Optional Finishes (extra cost)
■■
Aztec Gold
■■
Galaxy Gray Marblyte
™
(Bowl Only)
■■
Black Onyx Marblyte
™
(Bowl Only)
Optional Accessories (extra cost)
■■
Vandal-Resistant Kit
■■
Water Filter
■■
Easy-Flex
™
Bubbler
■■
Cane Apron
Each OVL-II
™
SER-Q consists of 3 cartons
as follows:
Mounting Frame
Cooling Unit-SJ8-Q
Fountain, Panels & Misc. Parts
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
A21 / 8-2007
MODEL OVL-II
™
SER-Q
Barrier-Free Cooler
Bi-Level
OVL-II
™
Series
halseytaylor.com
OVL-II
™
BARRIER-FREE SERIES
Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt
Ambient Air Temp
Cap. lb. Usage
70°F 80°F 90°F
†
100°F
OVL-II
™
SER-Q 9.3 8.3 7.5 6.8 7.5 4.0 135 370
* With projector service and tap water at 80° F
For additional specification of the cooling unit, see specification sheet for Model SJ8 Remote in this catalog.
†
UL listed and complies with ARI Standard 1010
Trap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE: