Instructions / Assembly

15
CONNECTING 1 LB. CYLINDER
WARNING
For your safety, when not in use remove the cylinder and the
regulator. Cap the cylinder, the insert tting and the quick
disconnect.
1. Make sure the control knob is in OFF position.
2. Remove plastic cap from top of propane cylinder.
Save cap for storage. Screw propane cylinder into
regulator. Be careful not to cross thread. Hand
Tighten only.
3. The regulator is equipped with Quick Connect. Align
the insert tting on the regulator to the quick connect
body on the side of Pizza oven. Pull back the spring-
loaded coupling then insert into quick connect
coupling rmly and release. The regulator insert will
snap in and lock in place. Perform leak check at this
connection.
4. Never operate oven with propane cylinder
upside down.
NOTICE: To perform a leak test of your gas connections, mix a 50/50 solution of soap and water and brush around regulator and other gas
connections. If growing bubbles appear, there is a leak. Re-tighten connections. If leaks cannot be stopped do not try to repair. Call for
replacement parts at 1-833-572-1688.
Check for leaks at these connections.
CONNECTING 1 LB. DISPOSABLE CYLINDER