Installation Guide

ManualsBrandsHalo ManualsKitchen5 in. Matte White Reflector LED Recessed Lighting Trim with White Flange

A. ML56 600/900 LED module

Module à ML56 600/900 DEL

Módulo ML56 600/900 LED

C. #8-32 Hex Nut (included)

Écrou hexagonal #8-32 (inclus)

Tuerca hexagonal #8-32 (incluido)

D. E26 Edison screw base adapter

(For retrofit only - see included

retrofit instructions)

Adaptateur pour culot vissé Edison E26

(pour une installation dans le cadre de

travaux de modernisation seulement -

reportez-vous aux instructions relatives

à ce type d’installation)

Adaptador Edison E26 con base

enroscable (solamente para adaptación;

consulte las instrucciones incluidas

para adaptación)

E. ML56 LED Trim (sold separately)

Garniture à DEL ML56

(vendu séparément)

Moldura para LED ML56

(vendido por separado)

B. #8-32 Self tapping screw (included)

Vis autotaraudeuse no 8-32 (fournie)

Tornillo N.° 8-32 autorroscante (incluido)

INS #

ADV142666

ITEMS REQUIRED

(Purchase separately)

•

Screwdriver

ARTICLES NÉCESSAIRES

(à acheter séparément)

•

Tournevis

ARTÍCULOS NECESARIOS

(se compran por separado)

•

Destornillador

ML56 – 600/900 Series Instructions

ML56 – 600/900 Instrucciónes Serie

ML56 – 600/900 Directives Serie

Packaging Contents

Contenu de l’emballage

Contenidos del embalaje

Summary of content (8 pages)

PAGE 1
INS # ADV142666 ML56 – 600/900 Series Instructions ML56 – 600/900 Instrucciónes Serie ML56 – 600/900 Directives Serie Packaging Contents Contenu de l’emballage Contenidos del embalaje C. #8-32 Hex Nut (included) Écrou hexagonal #8-32 (inclus) Tuerca hexagonal #8-32 (incluido) A. ML56 600/900 LED module Module à ML56 600/900 DEL Módulo ML56 600/900 LED B C B. #8-32 Self tapping screw (included) Vis autotaraudeuse no 8-32 (fournie) Tornillo N.
PAGE 2
ML56 – 600/900 LED Light Module Series IMPORTANT SAFETY INSTRUCTIONS When using product, basic precautions should always be followed, including the following: • Heed all warnings, including below warnings AND those included on product. • HALO® recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are UL/cUL listed in full compliance with UL 1598. Before attempting installation of any recessed lighting luminaire check your local electrical code.
PAGE 3
ML56 – 600/900 LED Light Module Series HOUSINGS • • • BOÎTIERS The ML56 600/900 series comes with a dedicated LED connector as a High Efficacy Luminaire (compliant with California Title 24 as a non-screw base) and is UL Listed for installation into HALO® H750ICAT, H750RICAT, H750T and H750TCP series, H2750ICAT, H550ICAT, H550RICAT recessed LED housings. The ML56 600/900 series also includes an E26 Edison screw base adapter to retrofit standard screw base housings.
PAGE 4
ML56 – 600/900 LED Light Module Series 6” Trims: 691X, 692X, 693X, 694X, 695X, 696X (Note shallow housings for use with 691X, 694X, 696X trims only) Juno®: Standard Housings: IC22, IC22R, IC22W, IC22S, IC23, IC23W, TC2, TC2R, IC2 Shallow Housings (use with 691X, 694X, 696X trims only): IC21, IC21R Capri: Standard Housings: CR1, PR1, QL1 Shallow Housings: (use with 691X, 694X, 696X trims only): R9ASIC/PS9RM Elco: HL7ICA (EL7ICA) Lithonia Lighting®: Standard Housings: LC6, L7X Shallow Housing (use with 691X,
PAGE 5
ML56 – 600/900 LED Light Module Series #1 Directional Trims Figure 4. Figure 6. Figure 5. 2. Lower LED module into trim. (Figure 5) 3. Rotate module clockwise until firmly secured to trim. (Figure 6) GROUND WIRE ATTACHMENT NNote: Ground wire must be securely installed to the housing. Three connection methods shown below. 1. For ground connection from LED module to housing, use provided green ground wire (factory installed) as shown in (Figure 7). 2. Connect open end of ground wire to housing.
PAGE 6
ML56 – 600/900 LED Light Module Series Figure 11. Figure 12.
PAGE 7
ML56 – 600/900 LED Light Module Series 5-YEAR LIMITED WARRANTY GARANTIE LIMITÉE DE 5 ANS GARANTIA LIMITADA DE 5 AÑOS THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
PAGE 8
Cooper Lighting, LLC n’est pas responsable de la marchandise endommagée durant le transport. Les produits réparés ou remplacés seront soumis aux modalités de la présente garantie et seront inspectés au moment d’être emballés. Tout dommage apparent ou non survenant pendant le transport doit être signalé immédiatement au transporteur effectuant la livraison et une réclamation doit être adressée à ce dernier.