Quick Installation Guide

HALNy HL-4GQV Quick Installation Guide
9
Caution:
l When a fiber is not in use, ensure to cover the optical interface of the ONU and
the dust cap of the optical fiber. Prevent grease, dust pollution or water
immersion, which may lead to unavailable fiber and optical interface of the
device.
l If fibers need to be fixed or bended during cabling, do not fasten the fibers too
tight. Avoid fiber extrusion, which may lead to increase of fiber material or
unavailable fiber.
3.2.3 Connecting the Power Adapter and Power Cord
l Connect the output end of the power adapter included in the device package to
the input end of the power supply of the ONU ,
l Insert one end of the power cord attached with the device into the input end of
the power adapter. Insert the other end of the power cord into the power socket,
l Check whether the Power indicator is on. If it is on, the power supply is normal.
Otherwise, check whether the power cord and the power adapter are correctly
connected.