Installation Guide

19
Daily Use
3. Remove dishes:
▶
▶
Let the dishes become cold before removing them from the appli-
ance. Hot dishes damage more easily.
▶ First remove the items from the lower basket, then from the
upper basket.
There can be water on the sides and on the door of the appliance.
Stainless steel becomes cool more quickly than the dishes.
End of Programme
When the programme is completed, the display shows and an ac-
coustic signal is heard (if it is not switched off). The display switches off.
1. Press
to switch off the appliance or the appliance switches into
standby mode automatically after 2 minutes.
2. Open the door.
CAUTION!
If the door will be opened immediately after the end of
programme, hot steam can escape. Danger of scalding!
Open the door carefully!
Standby Mode
Cancel Start Delay / Programme
1. Press the ON/OFF button for about 1 second.
▶ The start delay is cancelled.
▶ The programme is aborted.
▶ The appliance is switched off.
2. Start a new programme and a delayed start if desired.
CAUTION!
If a programme will be aborted in the process of washing dishes,
the residue of detergent remains on the dishes. These can cause
damage to health! Make sure to rinse off the detergent residues
completely before using these dishes again.
Make sure that there is detergent in the detergent dispenser before
start a new programme.
The switched on appliance will go into standby mode if it is not activated
within 2 minutes before starting a programme, or at the end of a
programme. This saves energy. The display switches off. To interrupt the
standby mode push one button.
Open the door slightly and leave it ajar (about 100 mm) to
help the drying process.