CDMA Mobile Phone User Guide

2.4 Charging the Battery

The D1200P can be charged either when it is switched on or off.

1.Plug the charger transformer into a standard outlet.

2.Insert the charger output plug into charging connector of the bottom of the

phone.

3.The rolling of the electric quantity bar indicates that the phone begins to

charge.

4.When the battery level full and stop rolled, the phone will display ' '.

5.After charging is complete, switch off the electric supply and pull out the

charger's jack.

When the battery level is low and only a few minutes of talk time remain, a

beep is heard, the battery icon flashes and the phone displays '

'. When battery is drained completely, the phone

displays ' '

When the battery is completely discharged, your phone will turn off.

The battery can be charged whenever you want. However, using your phone

while charging can increase the charging time.

Battery full

Note:

Battery Low,

please recharge soon!

Battery too low, Power off soon!