Manual

Beforeyou install your air conditioner check the Following:
.¢
12
1)
The unit is free of all obstructions inside and outside the room eg. drapes,
curtains, furniture, plants, shrubs, bushes, trees, other structures like building,
garage etc. Air condilioner must have clear unobslrucled airflow through the
condenser to remove the heat.
2)
The window is strong enough to hold the weight of the air conditioner.
Extra brackets or supports may be needed depending on your windows.
(Brackels or Supports not provided in all models)
3) The window sill and track are strong enough to hold theweight of the
ai r conditioner.
4) The wall is strong e,_ough to holcl the unit. Extra brackets or supporls may be
needed depending on the wall, (Brackets or Supports not provided in all models).
5) There is adequate and proper power supply near the air conditioner.
6) Be careful of exposed sharp edges of the cabinet and sharp coils ({ins) on
the back olr the unit thai could cut and cause serious injurv,.
7) DO NOT use adapter plugs.
8) DO NOT use extension cords.
9) DO NOT cut or remove lhe ground prong.
10) DO NOT modify the plug or the electrical wall outlet in any way.
If plug does not fit the electrical outlet have a certified electrician do the
necessary change,
11) DO NOT connect electrical power to the unit before installation.
12) DO NOT use if power cord is worn out, frayed or otherwise damaged.
Avoid using if there are cracks or abrasion damage along lhe length,
plug or connection.
131 DO NOT install into any existing cabinet or sleeve which does not have side
and lop air vents.