Installation Sheet
A
3579 LEVER
3470 & 3570 KNOB / 3670 LEVER
3470 / 3473 / 3570 /3573 LEVER
DOOR EDGE
DOOR EDGE
DOOR EDGE
ROSE
LATCH
LOCKING
CAM
B
LATCH
LOCKING
CAM
ROSE
C
LATCH
LOCKING
CAM
ROSE
DETAIL A
DETAIL B
DETAIL C
THIS PORTION OF THE CAM
SHOULD ALWAYS BE ON THE
RIGHT SIDE WHEN LOOKING
INSIDE THE LOCKBODY CYLINDER.
USING A SCREWDRIVER, ROTATE THE
1.
CAM CLOCKWISE UNTIL THE CAM IS IN
THE POSITION SHOWN IN DETAIL "A".
INSERT THE KEY INTO THE CYLINDER
2.
AND ROTATE THE TAILIECE 90 DEGREES
CLOCKWISE.
MAKING SURE THAT THE TAILPIECE
3.
ALIGNS WITH THE LOCKING CAM, INSTALL
THE LEVER ONTO THE LOCKBODY SHAFT
UNTIL THE LEVER CLICKS INTO PLACE.
USING A SCREWDRIVER, ROTATE THE
1.
CAM CLOCKWISE UNTIL IT STOPS. IT
SHOULD LOOK LIKE DETAIL "B" INSIDE
THE LOCKBODY.
LEVER:
INSERT THE KEY INTO THE
2.
CYLINDER AND ROTATE THE TAILPIECE
90 DEGREES CLOCKWISE.
KNOB:
MAKING SURE THAT THE
KEYHOLE IS FACING DOWNWARDS,
INSERT THE KEY AND ROTATE THE
TAILPIECE 90 DEGREES CLOCKWISE.
MAKING SURE THAT THE TAILPIECE
3.
ALIGNS WITH THE LOCKING CAM, INSTALL
THE LEVER/KNOB ONTO THE LOCKBODY
SHAFT UNTIL THE LEVER CLICKS INTO
PLACE.
USING A SCREWDRIVER, ROTATE THE CAM UNTIL IT LOOKS
1.
LIKE DETAIL "C" INSIDE THE LOCKBODY.
INSERT THE KEY INTO THE CYLINDER AND ROTATE THE
2.
TAILPIECE 90 DEGREES.
MAKING SURE THAT THE TAILPIECE ALIGNS WITH THE
3.
LOCKING CAM, INSTALL THE LEVER ONTO THE LOCKBODY
SHAFT UNTIL THE LEVER CLICKS INTO PLACE.
NOTE:
USE THE FOLLOWING INSTRUCTIONS ONLY IF
THE 3570 LOCKING CAM LOOKS LIKE THE PICTURE
BELOW.
USING A SCREWDRIVER, ROTATE THE CAM
1.
CLOCKWISE UNTIL IT STOPS.
NOW, ADJUST CAM SLOWLY BACK
2.
COUNTERCLOCKWISE UNTIL THE CAM IS
ORIENTED LIKE THE PICTURE BELOW.
INSERT THE KEY INTO THE CYLINDER AND
3.
ROTATE THE TAILIECE 90 DEGREES
CLOCKWISE.
MAKING SURE THAT THE TAILPIECE ALIGNS
4.
WITH THE LOCKING CAM, INSTALL THE LEVER
ONTO THE LOCKBODY SHAFT UNTIL IT CLICKS
INTO PLACE.
3470/3473/3570/3573/3579/3670 TIMING INSTRUCTIONS
REV: 03
DRAWING NO: I-LS00310
SHEET 1 OF 1
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149