Assembly Instructions

2
From time to time check that there are
no loose fittings. Tighten as necessary.
Always lift and move.
Check you have all the components and
and separate them into their groups.
1 2 1
Assemble the item as close to its final
position (in the same room) as possible.
Remove all fittings from the plastic bags
tools listed on the front cover and
page 3-4.
at least 2 people
Assembly requires
Apply a generous coating of Becker
Acroma GA932 oil. Allow to absorb
for 1-2 hours and wipe dry.
Always use place mats and coasters
to protect the surface from moisture
and heat.
Light marks can be sanded away with
very fine grade sandpaper and the
whole surface re-oiled.
The use of furniture polish or spray
is not necessary or recommended.
cleaning.
Repeat this procedure for periodic
Wipe up any spills immediately with
a damp cloth and then dry the surface
with a clean dry duster.
Dust regularly with a clean dry cloth.
Reapply oil every year.
Follow directions given.
Please see recommended
maximum loading guidance
near end of this document.