Jenson Mirror 926/9567 920/5679 Spare Parts Customer Support Visit: www.argos-support.co.uk Call: 0345 640 2020 Email: Help@ClickSpares.co.
Safety Important - Please read these instructions fully before starting assembly • Warning: This unit weighs approximately 49kgs. Please lift with care. • During assembly children should be kept away from the product due to possible risk of injury. • Installation shall only be carried out exactly according to the manufacturer’s instructions otherwise a safety risk can occur if incorrectly installed. • Do not use this item if any components are missing or damaged.
2 73.3 x 42.9cm 3 73.3 x 41.5cm XDF-00013817 DF-00013814 1 73.3 x 42.9cm DF-00013818 DF-00013264 DF-00013265 Cabinet Panels DF-00021437 4 120 x 45cm x 10 x3 8 59.45 x 18.9cm x6 11 54.3 x 14cm x6 WRP-00000258 9 40 x 14cm x3 WRP-00000211 WRP-00000209 7 59.45 x 18.9cm DF-00018646 Note: the internal drawer panels are grey DF-00018645 Drawer Panels 10 40 x 14cm x6 TDF-00018649 5 57.55 x 6cm 6 117.6 x 70.1cm 12 55.4 x 39.
Fittings Use these drawings to correctly identify the fittings x 19 C D x8 H x 24 x5 J E x 12 I x7 L x 12 F646 F F137 x5 F651 G F40 F22 x 26 F639 B F73 x 16 F51 A A F900 F901 Bag 1 x6 A A x 12 I x 24 K x 12 F171GY F3 F74 F901 F639 Bag 2 M x 24
F450 Fittings x 12 O x2 F474 N Tools Only used for drilling walls
1 Fitting Ball Bearing Runners www.youtube.
2 C x6 2 1 3 B x4 2 1 4 A x 10 2 1
5 H Fitting Ball Bearing Runners www.youtube.
6 C x3 3 7 B x2 3 8 B x 10 C x5 5 x4 5 x1
9 x3 1 5 5 5 5 x1 10 x3 1 5 5 5 5
x1 1 5 12 x1 D x5 3 x3 x1
13 x1 F x5 x3 x1 14 B x 10 C x5 5 x4 5 x1
15 x1 x3 5 5 5 5 5 16 x1 x5 5 5 5 5 5
17 x5 18 6
19 Squaring up a Chest and fitting the Back Panel www.youtube.com/watch?v=FeaI6541z7o The Back panel must be flush with the Back Rail.
21 Only use 1 Screw to fit each Bracket A x6 O x2 4 22 IMPORTANT: The Back panel must slot into the groove in the Top panel 4
23 24 x6 I x7
25 J x6
26 WARNING! O In order to prevent overturning this product must be used with the 2 wall attachment devices provided x2 See the next section for a guide to wall mounting and fixings Top Slide the Brackets against the wall. Fit the 2nd screws supplied with the Brackets into the underside of the Top panel. Mark the slot at the back of the Brackets for drilling into the wall. Wall fixings are not supplied as they will need to suit the wall type.
A Guide to Wall Mounting & Fixings Important note: If plastic wall plugs are supplied with your product: Important: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
Drawer Assembly x6 A A x 12 Bag 2 I x 24 K x 12 Warning: Glass! Handle with care L x 12 M x 24 Drawer Assembly www.youtube.com/watch?v=InNBV_uuMmo 27 x3 A x 12 E 7 x 12 8 28 x3 L Right-Hand Drawer Front I.D.
29 x2 10 x6 9 7 8 30 12 x6 7 8 31 M x 12 11 11 x6 x6
32 M x 12 x6 33 Before securing the Drawer Base, make sure it is inserted in all 4 grooves. You may need to manoeuvre it slightly.
34 I x 24 x6 Important: Make sure that the drawer assembly is square before fitting the wedgefixes.
35 Fitting Ball Bearing Runners www.youtube.com/watch?v=yG4xtiJJeSg K x6 I.D. hole Rig Dra ht-Han wer d Fro nt 8 3rd 8 2nd 8 1st 8 Warning: Use a Screwdriver to position the Runners as they could have sharp edges Starting with the bottom Right-Hand Drawer and working your way up, slide both of the Runners forward and locate the Drawer Sides between them, lining up the holes in the Drawer Sides with the 2nd 'threaded' holes in the Runners.
36 Fitting Ball Bearing Runners www.youtube.com/watch?v=yG4xtiJJeSg K x6 Le Dra ft-Han wer d Fro nt 7 Warning: Use a Screwdriver to position the Runners as they could have sharp edges 7 3rd 7 2nd 7 1st Starting with the bottom Left-Hand Drawer, slide both of the Runners forward and locate the Drawer Sides between them, lining up the holes in the Drawer Sides with the 2nd 'threaded' holes in the Runners.
37 Assembly is complete Please remove any blue protective film from panel edges and clear protective film from panel surfaces and clean the mirrors
ALR3549
