Assembly Instructions

ManualsBrandsHabitat ManualsChest Of DrawersHallingford 4+4 Drawer Chest - Grey Gloss

Assembly Instructions - Please keep for future reference

MADE IN

BRITAIN

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928

or email: Help@ClickSpares.co.uk (quoting your original order number)

Important - Please read these instructions fully before starting assembly

Dimensions

Width - 119.5cm

New Hallingford - 4+4 Drawer Chest

Issue 7 - 05/02/15

ALR2980

Depth - 40cm

Height - 74.5cm

Issue2 - 01/08/13 - Added text and numbered the drawers at Step 19 to explain the sequence that they should be inserted.

266/5508

268/9577

262/1638

245/7510

258/6625

Issue 3 - 20/11/13 - Changed to Click helpline number

Issue 4 - 12/03/14 - Knock-in Pegs changed to Grey.

16 Wedgefixes added.

4 Plastinails added.

Drawer depth increased.

Issue 5 - 21/04/14 - Add ‘New’ to title.

Issue 6 - 14/08/14 - Added Homebase code 272 825.

Issue 7 - 05/02/15 - Due to problems with Drawer Runners and construction, the front Rail is now attached to the Upright.

A mark hole has been added to the Rails.

A hole has been added in the bottom edge of the Upright.

Added Bracket F945, Screw F79 and Screw F65.

272 825

Summary of content (16 pages)

PAGE 1
New Hallingford - 4+4 Drawer Chest Assembly Instructions - Please keep for future reference 266/5508 258/6625 268/9577 262/1638 245/7510 272 825 Dimensions Width - 119.5cm Depth - 40cm Height - 74.5cm MADE IN BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs approximately 41.5kgs. Please lift with care. • Make sure you have enough space to layout the parts before starting. • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups.
PAGE 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 4
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.uk (quoting your original order number and the reference numbers below) Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
PAGE 5
Assembly Instructions If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.uk (quoting your original order number and the reference numbers below) Step 1 Prepare the drawer fronts B B Screw 2 metal dowels B into the holes shown on the back of each drawer front 5 . B 5 Note: Tighten the metal dowels up fully against the panels.
PAGE 6
Assembly Instructions Step 4 Fit the drawer base 7 Slide the drawer base 7 down the grooves in the drawer sides 8 and 9 and down into the groove in the drawer front 5 . 8 x8 9 5 Step 5 E Fit the drawer back E Fit the drawer back 10 between the drawer sides 8 and 9 . Make sure that the drawer base 7 fits into the groove in the drawer back 10 . 10 10 9 9 7 E 7 7 E x8 88 6 5 Hold the drawer back 10 in position and tap the knock-in pegs E through the holes in the drawer sides 8 and 9 .
PAGE 7
Assembly Instructions Runners must be pushed up against the drawer front Step 8 Fit runners to the drawers I I 5 R 8 L L Fit runner L c , marked ‘L’, to the bottom edge of the left drawer side 8 using the same method. L c Step 9 Prepare the 2 rails 9 I R Fit runner L d , marked with ‘R’, to the bottom edge of the right drawer side 9 , as shown, making sure that it is pushed up against the back of the drawer front .5 . Use a bradawl to mark the fixing positions, then secure with 2 screws I .
PAGE 8
Assembly Instructions Prepare the left side a: Fit 4 runners L a to the left side 1 . Finished front edge Step 10 1st H screw L a The 1st screw H uses the 2nd hole in from the front of the runner. The 2nd and 3rd screws .H use the holes that line up with the other panel holes. 2nd H 3rd H screw screw H a: H H Finished front edge H H H H H H H H L a H L a L a b: Fit a screw I into the 2nd hole in at the top of the runners L a . 1 L a Screw 2 metal dowels B into the left side 1 .
PAGE 9
Assembly Instructions Step 11 H H H Prepare the right side a: a: Fit 4 runners L b to the right side 2 . H H H H H H L b H H L b H L b The 1st screw H uses the 2nd hole in from the front of the runner. 2 Finished front edge L b 3rd H 2nd screw screw H 1st screw L b b: Fit a screw I into the 2nd hole in at the top of the runner L b . Screw 2 metal dowels B into the right side 2 . A b: D B I I I B Tap a wooden dowel A into the right side 2 .
PAGE 10
Assembly Instructions Step 12 Join the right side and rails B D 2 people are needed here Push the 2 rails 6 onto the right side 2 . 2 Use a screwdriver to tighten the 2 large locking nuts D fitted to the rails 6 . pla in c hip bo 6 ard sur fac in la p e d ar o b ip ch Note: Turn the large locking nuts D as far as they will go - more than 1/2 a turn. a rf su ce 6 Rail with bracket Note: Support this rail until the left side has been fitted in the next step.
PAGE 11
Assembly Instructions Step 14 Prepare the first surface of the upright H H a: Note: The colour of the upright may differ from the main unit colour. H H H H H H H L b H H L b H L b 3 a: Fit 4 runners L b to the upright 3 . 3rd H 2nd screw screw H 1st screw L b The 2nd and 3rd screws .H use the holes that line up with the other panel holes. Finished front edge H The 1st screw H uses the 2nd hole in from the front of the runner.
PAGE 12
Assembly Instructions Step 15 Finished front edge 1st H screw Prepare the other surface of the upright a: Fit 4 runners L a to the upright 3 . L a The 1st screw H uses the 2nd hole in from the front of the runner. The 2nd and 3rd screws .H use the holes that line up with the other panel holes. 2nd H 3rd H screw screw H Finished front edge a: H H H H H H H H H H L a H L a L a b: Fit a screw I into the 2nd hole in at the top of the runner L a .
PAGE 13
Assembly Instructions Step 16 B Prepare the top Screw 4 metal dowels B into the top 4 . B B in la p 4 d ar o b ip ch B a rf su ce Shaped front edge Step 17 Join the upright and top Push the upright 3 onto the top 4 . Use a screwdriver to tighten the 2 large locking nuts D fitted to the upright 3 .
PAGE 14
Assembly Instructions Step 18 2 people are needed here Fit the top Push the top 4 onto the 2 sides 1 and 2 . 4 2 Use a screwdriver to tighten the 2 large locking nuts D fitted to the sides 1 and 2 . 3 P Line up the hole in the bottom of the upright 3 with the bracket P and secure it using screw K . 1 K Step 19 Fit the back a: Square up the unit by making sure that measurement x to x equals y to y.
PAGE 15
Assembly Instructions Step 20 Fit the 4 plastic nails Tap 2 plastic nails N into the bottom edge of each of the sides 1 and .2 . Tap 1 plastic nail N into the bottom edge of the rail 6 in the centre.
PAGE 16
Assembly Instructions Step 21 Fit the drawers Slide the wheels of the runners fitted to the drawers, over the wheels of the runners fitted to the side panels and push the drawers into position. Note: We recommend that you fit the drawers in the sequence shown on the diagram. Assembly is complete 8 6 7 4 5 2 Warning: The unit is heavy. Lift with care. 3 1 Side panel Drawer If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.