Long Drawer - Grey Assembly Instructions - Please keep for future reference 8264563 Dimensions Length - 186cm Depth - 91cm Height - 21.5cm Weight - 15kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 Drawer side right x1 4 Drawer front x1 6 Drawer base x1 (89.8x17.0x1.5cm) No. 15-01508981-65 (185.6x21.5x1.5cm) No. 15-01518561-65 2 Drawer side left x1 (89.8x17.0x1.5cm) No. 15-01508982-65 3 5 Base list x2 (88.2x6.5x1.5cm) No. 12-01508821 Drawer back x1 (176.5x17.0x1.5cm) No. 12-01517651-65 (177.6x89.2/44.6x0.3cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3902-35015 No. 3901-40040 A C B 4,0x40mm Chipboard screw x12 3,5x15mm Chipboard screw x8 No. 3930-08030 Ø15/Ø6x24mm Spacer x2 No. 4003-002 No. 4020-005 H G No. 3940-000241 F Ø15x9,5mm Minifix cam x4 8x30mm Dowel x4 4,0x45mm Chipboard screw x2 No. 3933-15010 E D No.
Assembly Instructions Step 1 Attach dowels D to the drawer sides 1 and 2 . It may be necessary to tap the dowels in very gently with small hammer. Attach minifix bolts G to the drawer front 4 . G D 1 D D 2 G 4 Step 2 Attach knobs I to the drawer front 4 with screws A . A G I 4 A I A I Step 3 Attach the drawer sides 1 and 2 to the drawer front 4 with the minifix cams E .
Assembly Instructions Step 4 Push the drawer base 6 carefully into the grooves of drawer sides 1 and 2 so that it is placed into the groove on the drawer front 4 . 2 6 4 1 A Step 5 Attach the drawer back 5 to the drawer sides 1 and 2 with the screws A . 2 5 A 1 A B B Step 6 H Turn the drawer so that bottom side is up. Attach base lists 3 to the drawer front 4 and to the drawer back 5 with screws A .
Assembly Instructions Step 7 Attach spacers F to the front legs of your bed with screws C . Follow the measurements. F 2. 1. 9 mm F C F 210 mm Assembly is complete. C F If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 E-mail: order@flexa.dk Ref.no.
