Yani 4'，4'6"and 5' Bed to Go Assembly Instructions – Please keep for future reference 616/7129 606/9234 619/3571 621/9204 622/6242 621/7828 Dimensions (4') Dimensions (4'6) Dimensions (5') Length - 201cm Length - 201cm Length - 211cm Width - 129cm Width - 144cm Width - 159m Height - 105cm Height - 105cm Height - 105cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800 Issue 1 - 27
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Parts of the assembly will be easier with 2 people. • Make sure you have enough space to layout the parts before starting.
Components - Parts Please check you have all the parts listed below 1 Headboard panel ( 4'- 128 x 64cm ) ( 4'6- 143 x 64cm ) ( 5'- 158 x 64cm) 3 Side rail x 2 (4'- 98.4 x 10cm ) (4'6- 98.4 x 10cm) (5'- 103.4 x 10cm) 2 Headboard post x 2 4 Side rail x 2 (4'- 98.4 x 10cm) (4'6- 98.4 x 10cm) (5'- 103.4 x 10cm) 7 Support leg x 2 5 Slat (Thread each end) x 4 (45.5 x Ø3.2cm) (29.3 x 7cm) (4'- 127 X Ø1.9cm) (4'6- 142.1 X Ø1.9cm) (5'- 157.1 x Ø1.9cm) 6 Slat x 8 (4'- 127 X Ø1.9cm) (4'6- 142.1 X Ø1.
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0345 6400 800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 1 Assembling posts Place headboard panel 1 face down onto a clean flat surface. A B Back 2 Note: Fixing holes for posts should be facing up. A 1 B Secure headboard posts 2 to headboard panel 1 using fixings A and B . Front 2 Step 2 Assembling side rails 3 Assemble side rails 3 and 4 together using screws A . Repeat for the other side rail. A 4 3 A 4 Step 3 Assembling slats Assemble slats 5 to one side rail only, using screws C .
Assembly Instructions Step 4 Assembling slats Locate slats 6 into the remaining holes in the side rail. Note: Slats 6 have no threads in the end and do not require fixing. 6 6 3 6 6 6 6 4 6 6 Step 5 Assembling slats With help, locate the remaining side rail onto the ends of the slats. Secure using screws C as shown.
Assembly Instructions Step 6 Assembling side rails a: With help, assemble side rails to the headboard using fixings B , D , E and F . Assemble footboard 8 to the side rails using fixings B , C and E . a: 9 d: b: c: F Assemble support leg 7 to the underside of the side rail using screws A. Repeat on both sides. B D 4 E 1 a: E F 2 B D d: Screw finials 9 into the headboard and footboard corner posts.
Assembly Instructions Step 7 Assembling slat supports Assemble central supports 10 and support legs 11 through slats 5 using screws G . G 6 10 Note: Central supports 10 fit underneath the slats. 5 11 G G 5 G 5 5 G 5 10 11 11 11 11 Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800 Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes.
