SAFETY DATA SHEET 50.17015- Section 1. Identification Product name : H&C® CLEARPROTECT High Performance Industrial Clear Coat Product code : 50.17015- Other means of : Not available. identification Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Paint or paint related material. Manufacturer : H&C Products Group 101 W.
Section 2. Hazards identification Hazard pictograms : Signal word : Danger Hazard statements : Flammable liquid and vapor. Harmful if inhaled. Causes serious eye irritation. Causes skin irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May damage fertility or the unborn child. Suspected of causing cancer. May be fatal if swallowed and enters airways. May cause respiratory irritation.
Section 2. Hazards identification treatment. Have this label with you. Reacts with water in closed container to produce pressure which may cause container to burst. Please refer to the SDS for additional information. Keep out of reach of children. Do not transfer contents to other containers for storage. Hazards not otherwise classified : None known. Section 3. Composition/information on ingredients Substance/mixture : Mixture Other means of identification : Not available.
Section 4. First aid measures Skin contact : Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse. : Get medical attention immediately. Call a poison center or physician. Wash out mouth with water.
Section 4. First aid measures Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. See toxicological information (Section 11) Section 5.
Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Section 8. Exposure controls/personal protection Xylene, mixed isomers 1330-20-7 n-Butyl Acetate 123-86-4 1,2,4-Trimethylbenzene 95-63-6 Ethyl 3-Ethoxypropionate Light Aromatic Hydrocarbons Ethylbenzene 763-69-9 64742-95-6 100-41-4 p-Toluenesulfonyl Isocyanate Bis(pentamethyl-4-piperidyl)sebacate 1,3,5-Trimethylbenzene 4083-64-1 41556-26-7 108-67-8 UV Light Absorber Benzotriazole Hydroxyphenyl Polymer Cumene 104810-48-2 104810-47-1 98-82-8 Date of issue/Date of revision 50.
Section 8. Exposure controls/personal protection Dibutyltin Dilaurate 77-58-7 1,2,3-Trimethylbenzene 526-73-8 Pentamethyliperidyl Sebacate Hexamethylene Diisocyanate (max.) 82919-37-7 822-06-0 ACGIH TLV (United States, 3/2019). Absorbed through skin. TWA: 0.1 mg/m³, (as Sn) 8 hours. STEL: 0.2 mg/m³, (as Sn) 15 minutes. NIOSH REL (United States, 10/2016). Absorbed through skin. TWA: 0.1 mg/m³, (as Sn) 10 hours. OSHA PEL (United States, 5/2018). TWA: 0.1 mg/m³, (as Sn) 8 hours.
Section 8. Exposure controls/personal protection TWAEV: 100 ppm 8 hours. TWAEV: 434 mg/m³ 8 hours. STEV: 150 ppm 15 minutes. STEV: 651 mg/m³ 15 minutes. CA Ontario Provincial (Canada, 1/2018). STEL: 150 ppm 15 minutes. TWA: 100 ppm 8 hours. CA Saskatchewan Provincial (Canada, 7/2013). STEL: 150 ppm 15 minutes. TWA: 100 ppm 8 hours. Normal butyl acetate 123-86-4 CA Alberta Provincial (Canada, 6/2018). 15 min OEL: 200 ppm 15 minutes. 15 min OEL: 950 mg/m³ 15 minutes. 8 hrs OEL: 150 ppm 8 hours.
Section 8. Exposure controls/personal protection TWAEV: 100 ppm 8 hours. TWAEV: 434 mg/m³ 8 hours. STEV: 125 ppm 15 minutes. STEV: 543 mg/m³ 15 minutes. CA Saskatchewan Provincial (Canada, 7/2013). STEL: 125 ppm 15 minutes. TWA: 100 ppm 8 hours. CA Alberta Provincial (Canada, 6/2018). 8 hrs OEL: 50 ppm 8 hours. 8 hrs OEL: 246 mg/m³ 8 hours. CA British Columbia Provincial (Canada, 5/2019). TWA: 25 ppm 8 hours. STEL: 75 ppm 15 minutes. CA Ontario Provincial (Canada, 1/2018). TWA: 50 ppm 8 hours.
Section 8. Exposure controls/personal protection Dibutyltin Dilaurate Appropriate engineering controls Environmental exposure controls 77-58-7 TWA: 20 ppm 8 hours. NOM-010-STPS-2014 (Mexico, 4/2016). Absorbed through skin. TWA: 0.1 mg/m³, (as Sn) 8 hours. STEL: 0.2 mg/m³, (as Sn) 15 minutes. : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Section 9. Physical and chemical properties pH Melting point/freezing point : Not available. : Not available. Boiling point/boiling range : 123°C (253.4°F) Flash point : Closed cup: 43°C (109.4°F) [Tagliabue Closed Cup] Evaporation rate : 1 (butyl acetate = 1) Flammability (solid, gas) : Not available. Lower and upper explosive (flammable) limits : Lower: 0.7% Upper: 12.1% Vapor pressure : 1.3 kPa (10 mm Hg) [at 20°C] Vapor density Relative density : 3.66 [Air = 1] : 1.
Section 11. Toxicological information Product/ingredient name Result Species Hexamethylene Diisocyanate LC50 Inhalation Vapor Polymer Methyl n-Amyl Ketone LD50 Oral Xylene, mixed isomers LC50 Inhalation Gas.
Section 11. Toxicological information Dibutyltin Dilaurate Skin - Moderate irritant Rabbit - Eyes - Moderate irritant Rabbit - Skin - Severe irritant Rabbit - mg 24 hours 100 mg 24 hours 100 mg 500 mg - Sensitization Not available. Mutagenicity Not available. Carcinogenicity Not available. Classification Product/ingredient name OSHA IARC NTP Xylene, mixed isomers Ethylbenzene Cumene - 3 2B 2B Reasonably anticipated to be a human carcinogen. Reproductive toxicity Not available.
Section 11.
Section 11. Toxicological information Ingestion : Adverse symptoms may include the following: nausea or vomiting reduced fetal weight increase in fetal deaths skeletal malformations Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : Not available. effects Potential delayed effects : Not available. Long term exposure Potential immediate effects : Not available. Potential delayed effects : Not available.
Section 12. Ecological information Acute EC50 3600 µg/l Fresh water Acute EC50 6.53 mg/l Marine water Acute EC50 2.93 mg/l Fresh water 1,3,5-Trimethylbenzene Acute LC50 4200 µg/l Fresh water Acute LC50 13000 µg/l Marine water Cumene Acute LC50 12520 µg/l Fresh water Chronic NOEC 400 µg/l Fresh water Acute EC50 2600 µg/l Fresh water Acute EC50 7.4 mg/l Marine water Acute EC50 10.
Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
Section 14. Transport information Special precautions for user : Multi-modal shipping descriptions are provided for informational purposes and do not consider container sizes. The presence of a shipping description for a particular mode of transport (sea, air, etc.), does not indicate that the product is packaged suitably for that mode of transport.
Section 16.
Date of issue/Date of revision 50.