Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- QUICK REFERENCE
- Menu Tree / Operation Shortcuts
- Convention
- Acquire Key
- Acquire Key - Segments
- Autoset Key
- CH1 ~ 4 Key
- Cursor Key
- Display Key
- Help Key
- Math Key
- Measure Key
- Hardcopy Key
- Run/Stop Key
- REF Key
- Save/Recall Key
- Test Key
- Test Key – Go-NoGo
- Trigger Type Menu
- Trigger Edge Menu
- Trigger Delay Menu
- Trigger Pulse Width Menu
- Trigger Video Menu
- Trigger Pulse Runt Menu
- Trigger Rise & Fall Menu
- Trigger Timeout Menu
- Utility Key
- Utility Key – I/O
- Utility Key – File Utilities
- Utility Key – Wave Generator - Demo Outputs
- Search - Edge
- Search – Pulse Width
- Search - Runt
- Search – Rise/Fall Time
- Zoom Key
- Option Key
- Default Settings
- Built-in Help
- Menu Tree / Operation Shortcuts
- MEASUREMENT
- CONFIGURATION
- OPTIONAL SOFTWARE and APPS.
- SAVE/RECALL
- FILE UTILITIES
- HARDCOPY KEY
- REMOTE CONTROL CONFIG
- MAINTENANCE
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the (Measurement result / FFT result / Help contents) from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- I can’t save files to the internal memory.
- The display image printout is too dark on the background.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-2000A Series User Manual
54
Trigger Pulse Runt Menu
Type
Pulse Runt
Source Polarity Mode Holdoff
Auto
Normal
EXT Probe
Volt
Current
When
>
<
=
≠
10.0ns~10.0s
Threshold
Set to TTL
1.4V
Set to ECL
-1.3V
-XX~XXV
-XX~XXV
10.0ns~10.0s
Set to
Minimum
On
Off
Alternate
CH1~ CH4
1mX ~ 1kX
Attenuation
Trigger Rise & Fall Menu
Type
Rise & Fall
Source Mode Holdoff
Auto
Normal
When
>
<
=
≠
10.0ns~10.0s
Threshold
Set to TTL
1.4V
Set to ECL
-1.3V
-XX~XXV
-XX~XXV
Slope
High
Low
10.0ns~10.0s
Set to
Minimum
EXT Probe
Volt
Current
On
Off
Alternate
CH1~ CH4
1mX ~ 1kX
Attenuation
Trigger Timeout Menu
Type
Timeout
Source Timer
10.0ns~10.0s
Trigger
When
EXT Probe
Volt
Current
CH1~ CH4,
D0~D15, AC
Line
1mX ~ 1kX
Attenuation
DC
AC
Off
HF
LF
Reject
On
Off
Noise Reject
Coupling
Stays High
Stays Low
Either
Level
-XX~XXV
Set to TTL
1.4V
Set to ECL
-1.3V
Set to 50%
Mode / Holdoff
Auto
Normal
Holdoff
10.00ns ~ 10.0s
Holdoff
Set to
Minimum