Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- QUICK REFERENCE
- Menu Tree / Operation Shortcuts
- Convention
- Acquire Key
- Acquire Key - Segments
- Autoset Key
- CH1 ~ 4 Key
- Cursor Key
- Display Key
- Help Key
- Math Key
- Measure Key
- Hardcopy Key
- Run/Stop Key
- REF Key
- Save/Recall Key
- Test Key
- Test Key – Go-NoGo
- Trigger Type Menu
- Trigger Edge Menu
- Trigger Delay Menu
- Trigger Pulse Width Menu
- Trigger Video Menu
- Trigger Pulse Runt Menu
- Trigger Rise & Fall Menu
- Trigger Timeout Menu
- Utility Key
- Utility Key – I/O
- Utility Key – File Utilities
- Utility Key – Wave Generator - Demo Outputs
- Search - Edge
- Search – Pulse Width
- Search - Runt
- Search – Rise/Fall Time
- Zoom Key
- Option Key
- Default Settings
- Built-in Help
- Menu Tree / Operation Shortcuts
- MEASUREMENT
- CONFIGURATION
- OPTIONAL SOFTWARE and APPS.
- SAVE/RECALL
- FILE UTILITIES
- HARDCOPY KEY
- REMOTE CONTROL CONFIG
- MAINTENANCE
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the (Measurement result / FFT result / Help contents) from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- I can’t save files to the internal memory.
- The display image printout is too dark on the background.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
APPENDIX
255
GTP-250A-2
Applicable to: GDS-2202A & GDS-2204A
Position X10
Attenuation Ratio
10:1
Bandwidth
DC to 250MHz
Rise Time
1.4nS
Input Resistance
10MΩ when used with oscilloscopes
with 1MΩ input.
Input Capacitance
Approximately 17pF
Compensation Range
10 to 35pF
Max. Input Voltage
500V CAT I, 300V CAT II (DC + peak
AC) derating with frequency.
Position X1
Attenuation Ratio
1:1
Bandwidth
DC to 6MHz
Rise Time
58nS
Input Resistance
1MΩ (Oscilloscope Input)
Input Capacitance
47pF plus oscilloscope capacitance
Max. Input Voltage
300V CAT I, 150V CAT II (DC + peak
AC) derating with frequency.
Safety
EN61010-031 CAT II
GTP-350A-2
Applicable to: GDS-2302A & GDS-2304A
Position X10
Attenuation Ratio
10:1
Bandwidth
DC to 350MHz
Rise Time
1.0nS
Input Resistance
10MΩ when used with oscilloscopes
with 1MΩ input.
Input Capacitance
Approximately 13pF
Compensation Range
10 to 25pF
Max. Input Voltage
500V CAT I, 300V CAT II (DC + peak
AC) derating with frequency.
Position X1
Attenuation Ratio
1:1
Bandwidth
DC to 6MHz
Rise Time
58nS
Input Resistance
1MΩ (Oscilloscope Input)
Input Capacitance
46pF plus oscilloscope capacitance
Max. Input Voltage
300V CAT I, 150V CAT II (DC + peak
AC) derating with frequency.
Safety
EN61010-031 CAT II