Other

Mix Modular Series
1 Position your Mix Modular components in the desired
configuration and location.
2 To join adjacent components, rotate the Connector Clip
of the first component so that it becomes perpendicular
with the bottom edge. See Fig 1
3 Align the Connector Clip with the Connector Post on the
adjacent component, and push together until they lock in
place. See Fig 2
4 To separate and rearrange your connected Mix Modular
components, simply lift the edge of the component with the
Connector Post upwards until it slides out of the Connector
Clip on the adjacent component.
Depending on the flooring surface that your Mix Modular will rest on, you may wish to attach
the components using the integrated connectors.
SIDE VIEW - To Attach
SIDE VIEW - To Detach
BOTTOM VIEW
CONNECTOR CLIP
CONNECTOR POST
Attaching Components
Connector Removal
The Mix Modular is designed to allow an infinite number of possible arrangements. In some configurations,
unused connector hardware may be visible. Should you desire to remove the hardware that is not in use,
simply tip the component on its back and unscrew the visible hardware with a Phillips head screwdriver.
Ensure you keep the removed hardware and screws to enable future expansion or reconfiguration of your
Mix Modular components.
Fig 1
Fig 2