User's Manual

37
As the antenna is moved forward, a black line
indicates the progression along the grid line
If a mistake is made during the
measurement, or the line is not completed,
select Stop and then Next Line, an option
will appear to restart the line.
When the line is completed, the GX
Controller will indicate the completed line
by changing the screen ready for the next
line.
Move the antenna over to the next grid line
and select Next Line.
Repeat these steps until the X-axis is
completed.
Move the antenna to the start of the Y-axis
and continue the measurements along the Y-
axis until the grid is completed. Next, select
Stop and Process to complete the initial
processing stage.
Once the processing is complete, the Grid
Project screen shows the plan view and one
cross sectional (side) view in the X or Y-axis.
Select the Settings icon to proceed to the next step.