MSDS

ManualsBrandsGuardsman ManualsCleaningWater Ring and Mark Remover

Material Safety Data Sheet

_________________________________________________________________________________________

1. PRODUCT AND COMPANY IDENTIFICATION

Product name:

Ring & Stain Remover w/tray (12)

Product code:

405512

Print Date:

22/May/2012

Revision Date:

13/May/2011

Recommended use:

Furniture Maintenance and Repair

Company Identification:

Guardsman, a division of Valspar

4999 36th St SE

Grand Rapids, MI 49512

USA

Manufacturer's Phone:

1-800-253-3957

Australia Poisons Information

Centre 24 hours:

131-126

2. HAZARDS IDENTIFICATION

Classified as hazardous according to criteria of NOHSC.

Classified as NON-DANGEROUS according to Australian Dangerous Goods Code.

Indication of danger:

Xn - Harmful

R48/20 - Harmful: danger of serious damage to health by prolonged exposure through inhalation.

S-phrase(s)

S23 - Do not breathe gas/fumes/vapour/spray.

S51 - Use only in well-ventilated areas.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredient Name

CAS-No.

Approx.

Weight %

Chemical Name

Product ID: 405512

Page 1 / 5

Summary of content (5 pages)

PAGE 1
Material Safety Data Sheet _________________________________________________________________________________________ 1.
PAGE 2
3. COMPOSITION / INFORMATION ON INGREDIENTS QUARTZ 14808-60-7 DIIODOMETHYL-PTOLYSULFONE 20018-09-1 10-30 QUARTZ (Si02) 0.2-0.5 Benzene, 1-[(diiodomethyl)sulfonyl]-4-methyl- If this section is blank, there are no hazardous components per NOHSC guidelines. 4. FIRST AID MEASURES General If symptoms persist, call a physician. Never give anything by mouth to an unconscious person. Skin: Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water.
PAGE 3
6. ACCIDENTAL RELEASE MEASURES Methods for cleaning up: Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Clean with detergents. Avoid solvents. 7. HANDLING AND STORAGE Handling: Operators should wear anti-static footwear and clothing.
PAGE 4
9. PHYSICAL AND CHEMICAL PROPERTIES Solubility in water: Flash point: Boiling point/range Specific Gravity not determined 94°C 218°C 1 10. STABILITY AND REACTIVITY Stability: Conditions to avoid: Materials to avoid: Hazardous Polymerization: Hazardous decomposition products: Stable under normal conditions. Stable under recommended storage conditions. Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions. None anticipated.
PAGE 5
14. TRANSPORTATION INFORMATION IATA: Proper shipping name: NOT REGULATED 15. REGULATORY INFORMATION AICS Australian Inventory: This product/preparation is in compliance with the Australian Inventory of Chemical Substances (AICS) list. Label Information: Indication of danger: Xn - Harmful R48/20 - Harmful: danger of serious damage to health by prolonged exposure through inhalation. S-phrase(s) S23 - Do not breathe gas/fumes/vapour/spray. S51 - Use only in well-ventilated areas. 16.