Operation Manual

79
ENGLISH
Connecting a PC
1 Connect the socket »PC-IN« on the television
to the corresponding socket on the PC using
a VGA cable.
2 Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable.
Note:
7
Adjust your PC to the monitor (for example,
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
Selecting the channel position
for the PC
1 Press » « and use »
<
« or »
>
« to select
input signal »PC«, then confirm with »OK«.
Settings for the PC
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press »OK« to confirm.
– »Source Setup« menu is displayed.
PC MONITOR MODE
----------------------------------------------------------------------------------
Source Setup
Sound Settings Parental Guidance
Back ExitChange Area
Auto Adjust
Auto Adjust Mode Off
Position 0H-0V
Size 0
Phase 0
4 Select the function and setting you want
using »
V « or » Λ « and set with »
<
« or »
>
«.
Options:
– »Auto Adjust«, for automatic PC configura-
tion;
– »Auto Adjust Mode«, when set to »On«,
automatically makes adjustments in PC
mode;
– »Position«, adjusts the picture position
horizontally and vertically;
– »Size«, sets the cycle frequency;
– »Phase«, removes horizontal flicker, blur-
ring and horizontal lines.
5 Press »EXIT« to end the setting.