Operation Manual

ENGLISH
68
Resetting the television to its
original state
This function enables you to delete the station
lists and all custom settings.
1 From the »About« menu use »
V « or » Λ «
to select the line »Restore Factory Defaults«
and press »OK« to confirm.
– Warning screen will be displayed.
Note:
7
If the loaded applications are also to be de-
leted, select the line »Installed applications«
by pressing »
Λ « and remove the small tick
with »OK«.
2 Press »

« (green) to confirm the reset func-
tion.
– In a short while »Installation Guide« is
displayed.
3 Continue the settings as described in the
chapter on first installation and searching
for channels on page 16.
Deleting channel history
This function allows you to delete channel history
stored in the Main menu.
1 From the »About« menu use »
V « or » Λ « to
select the line »Delete Channel History« and
press »OK« to confirm.
2 Press »

« (green) to confirm the reset func-
tion.
– The preview images in the main menu are
deleted.
CONVENIENCE FUNCTIONS
------------------------------------------------------------
Timer settings
1 Open menu with »MENU« button.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Timer Apps« with »
>
«
or »
<
« and press »OK« to confirm.
– »Timer Applications« menu is displayed.
Timer Applications
Parental Guidance
Network Configuration
Back ExitChange Area
Sleep Timer Off
Auto On
Auto Off
Advanced
Note:
7
Additional operations are explained in the
following sections.
Sleep timer
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line »Sleep Timer« with »
V « or
»
Λ «.
2 Select the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
set the switch-off time to »Off«.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
On timer
In the On Timer menu, you can enter a switch-on
time for the television.
The television switches on with the preset vol-
ume and the desired channel after the set time in
stand-by mode has elapsed.
1 Select the line »Auto On« with »
V « or » Λ «
and press »OK« to confirm.