Operation Manual

ENGLISH
66
Advanced settings
1 Open menu with »MENU« button.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »TV Settings« with »
>
«
or »
<
« and press »OK« to confirm.
4 Select the line »Advanced Settings« with
»
V « or » Λ « and press »OK« to confirm.
Note:
7
Additional operations are explained in the
following sections.
Auto sleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup, un-
less the television receives any signal, or keys or,
according to European regulations, the remote
remains untouched for 5 minutes.
1 From the »Advanced Settings« menu use
»
V « or » Λ « to select the line »Auto Sleep«.
2 Select the switch-off time with »
<
« or »
>
«.
Note:
7
Set the function to »Off« with »
<
« or »
>
« to
switch off.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Fast switching
Using this function the time is take to switch be-
tween channels is changed. (Setting »Yes« 1 to
2 seconds, setting »No« 2 to 5 seconds.).
1 From the »Advanced Settings« menu use
»
V « or » Λ « to select the line »Fast Zap-
ping«.
2 Activade the function with »
<
« or »
>
«
(»Yes«).
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
CONVENIENCE FUNCTIONS
------------------------------------------------------------
Store logo view
This function is intended for feature introduction
at stores. When »On« is selected, feature logos
are displayed.
1 From the »Advanced Settings« menu use
»
V « or » Λ « to select the line »Shop Logo
Display«.
2 Select »Yes« with »
<
« or »
>
«.
Note:
7
Set the function to »No« with »
<
« or »
>
« to
switch off.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Power LED brightness
You can adjust power (stand-by) LED brightness
in operation mode of television.
1 From the »Advanced Settings« menu use
»
V « or » Λ « to select the line »Power LED
Brightness«.
2 Use »
<
« or »
>
« to set the brightness to
»High«, »Medium« or »Low«.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Power save mode
It ensures automatic shut off of screen in An-
tenna, Cable, Satellite and radio channels and
USB mode when playing audio files.
1 From the »Advanced Settings« menu use
»
V « or » Λ « to select the line »Power Sav-
ing Mode«.
2 Press »
<
« or »
>
« to set shut off time of dis-
play as »10 Seconds«, »30 Seconds«, »60
Seconds«.
3 Press »BACK
<
« to go back one menu
level or press »EXIT« to end the setting.
Note:
7
If the screen closes while listening to music in
USB mode, press »MENU« and select »Off«
with »
<
« or »
>
« to close the feature.