Operation Manual

ENGLISH
50
USB RECORDING
-------------------------------------------------------------------------------------------
Connecting external data media
Notes:
7
It is advised to put the television on stand-by
mode before connecting the Skype camera.
7
Before disconnecting the external data me-
dium, the television must first be switched to
standby, otherwise files can be damaged.
7
There are two USB inputs on the television,
namely »USB1« and »USB2 (HDD)«.
»USB2 (HDD)« input is intended for USB
devices that require additional power (e.g.
external hard disk).
1 Plug the external hard disk to the »USB2
(HDD)« USB interface of the television;
or
plug the memory stick in one of the »USB1«
sockets of the television.
Notes:
7
Both sockets »USB1« of the television sup-
ports 500 mA current according to the USB
standard. Devices such as external hard disk
and etc. that consume more power can only
be connected to the »USB2 (HDD)« USB
interface of the television.
7
If you are using a power cable for the ex-
ternal hard disk that you have connected to
the »USB2 (HDD)« USB interface, then the
power cable of the external hard disk must
also be unplugged when the TV is turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device is
being read by the TV.
USB recording settings
Selecting the menu
1 Open the menu with »MENU«.
2 Select the menu item »PRnP« with »
>
« or
»
<
« and press »OK« to confirm.
– »Media Player« menu is displayed.
3 Select the option »PVR« with »
>
« or »
<
«
and press »OK« to confirm.
– The content is displayed.
4 Press »

« (green).
– »Media Options« menu is displayed.
Noname
Media Player
PVR
Back
Media SourceInfo
Total Area (MB) 14.2
Used Area (MB) 13.6
Empty Area (MB) 0.6
USB DRIVE
Media Options
View Mode Full Screen
Auto Preview On
Slide Show Range 5
Disk Management
5 Select the line »Disk Management« with
»
V « or » Λ « and press »OK« to confirm.
Note:
7
Additional operations are explained in the
following sections.