Submittal Sheet

ManualsBrandsGrundfos ManualsCirculator PumpsTP100-160/2 Direct Coupled In-Line Circulator, 3 HP, Bronze, 115/208-230V, GF 100 Flange Mount

Company name:

Created by:

Phone:

Fax:

Date:

Printed from Grundfos CAPS [2011.05.069]

Position Count Description Unit price

-1 On

request

TP 100-160/2 B U-G-Z-BUBE

Product photo could vary from the actual product

Product No.: 96411852

Single-stage centrifugal in-line single-head pump.

The in-line design with opposite suction and dis-

charge ports enables mounting in pipework or on

a concrete foundation.

The shaft seal is a corrosion-resistant

maintenance-free mechanical seal.

The motor is a 1-phase AC motor.

Liquid:

Liquid temperature range: 5 .. 284 °F

Liquid temp: 68 °F

Technical:

Speed for pump data: 3470 rpm

Actual calculated flow: 242 US gpm

Resulting head of the pump: 34.3 ft

Shaft seal: BUBE

Maximum operating pressure: 145 psi

Approvals on motor nameplate: UL Recognized Component, CSA

Materials:

Pump housing: Bronze

DIN W.-Nr. 2.1093

Impeller: Stainless steel

DIN W.-Nr. 1.4301

AISI 304

Installation:

Maximum ambient temperature: 104 °F

Maximum operating pressure: 145 psi

Flange standard: ANSI

Pipe connection: 4"

Pressure stage: 125 Lb.

Electrical data:

1/4

Summary of content (4 pages)

PAGE 1
Company name: Created by: Phone: Fax: Date: Position Count -1 - Description Unit price TP 100-160/2 B U-G-Z-BUBE On request Product photo could vary from the actual product Product No.: 96411852 Single-stage centrifugal in-line single-head pump. The in-line design with opposite suction and discharge ports enables mounting in pipework or on a concrete foundation. The shaft seal is a corrosion-resistant maintenance-free mechanical seal. The motor is a 1-phase AC motor.
PAGE 2
Company name: Created by: Phone: Fax: Date: Position Count Description Unit price Motor type: Number of poles: Rated power - P2: Main frequency: Rated voltage: Service factor: Rated current: Starting current: Cos phi - power factor: Rated speed: Motor efficiency at full load: Insulation class (IEC 85): Baldor, TEFC 2 2.95 HP 60 Hz 1 x 115/208-230 V 1,15 29/16-14,5 A 170/93,5-85 A 88 3450 rpm 75 % F Others: Net weight: Gross weight: Shipping volume: 195 lb 205 lb 4.
PAGE 3
Company name: Created by: Phone: Fax: Date: Description Product name: Product Number: EAN number: Value TP 100-160/2 B U-G-Z-BUBE U-G-Z BUBE 96411852 5700390526207 - H (ft) TP 100-160/2 B, 60 Hz Pumped liquid = Water Liquid temperature = 68 °F Density = 62.4 lb/ft³ 40 30 10 0 0 P2 (HP) 50 100 150 200 Q(US gpm) 2 6 5/16" 104 °F 145 psi ANSI G 4" 125 Lb. M16 5" 4" 6" 8 1/2" Liquid: Liquid temperature range Liquid temp: 5 ..
PAGE 4
Company name: Created by: Phone: Fax: Date: - 96411852 TP 100-160/2 B 60 Hz 6 5/16" M16 5" 4" 6" 4 3/16" 6 3/16" 7 1/16" NPT 1/4 4 13/16" 25 9/16" 3/4" 8 1/2" 10 1/2" 21" 7 9/16" 9 1/16" Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS [2011.05.