UPS32-80/2 Specifications Guide

ManualsBrandsGrundfos ManualsCirculator PumpsUPS32-80/2F 3-Speed Cast Iron Circulator Pump 208-230, 1/2 HP

Company name:

Created by:

Phone:

Fax:

Date:

Printed from Grundfos CAPS [2011.05.069]

Position Count Description Unit price

-1 On

request

UPS 32-80

Product photo could vary from the actual product

Product No.: 96402708

The pump is of the canned rotor type, i.e. pump

and motor form an integral unit without shaft

seal and with only two gaskets for sealing.

The bearings are lubricated by the pumped liquid.

In order to avoid problems in connection with

disposal, great importance has been attached to

using as few different materials as possible.

The pump is characterized by:

* 3-speed motor.

* Ceramic radial bearings.

* Carbon axial bearing.

* Stainless steel rotor can, bearing plate

and rotor cladding.

* Aluminium alloy stator housing.

* Cast iron pump housing.

* Stator with built-in thermal switch.

The motor is a 1-phase motor.

The pump is supplied with a standard

module in the terminal box.

The standard module is to be connected to the

mains supply via external contactor.

Controls:

Relay: with relay

Liquid:

Liquid temperature range: 14 .. 248 °F

Liquid temp: 68 °F

Technical:

Actual calculated flow: 28.1 US gpm

Resulting head of the pump: 19.8 ft

Maximum operating pressure: 145 psi

Approvals on nameplate: CUL

1/5

Summary of content (5 pages)

PAGE 1
Company name: Created by: Phone: Fax: Date: Position - Count Description Unit price -1 UPS 32-80 On request Product photo could vary from the actual product Product No.: 96402708 The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
PAGE 2
Company name: Created by: Phone: Fax: Date: Position Count Description Materials: Pump housing: Impeller: Unit price Cast iron EN-JL1040 ASTM 35 B - 40 B Stainless steel DIN W.-Nr. 1.4301 AISI 304 Installation: Range of ambient temperature: Maximum operating pressure: Flange standard: Type of connection: Pipe connection: Pressure stage: Port-to-port length: 32 .. 104 °F 145 psi USA Oval F 32 145 psi 11" mm Electrical data: Power input in speed 1: Power input in speed 2: Max.
PAGE 3
Company name: Created by: Phone: Fax: Date: Description Product name: Product Number: EAN number: Value UPS 32-80 F 96402708 5700390678401 Technical: Speed Number: Actual calculated flow: Resulting head of the pump: Head max: Maximum operating pressure Approvals on nameplate: Model: 3 28.1 US gpm 19.8 ft 26.2 ft 145 psi CUL C 20 16 12 8 4 0 0 P1 (W) Cast iron EN-JL1040 ASTM 35 B - 40 B Stainless steel DIN W.-Nr. 1.4301 AISI 304 Liquid: Liquid temperature range Liquid temp: 14 ..
PAGE 4
Company name: Created by: Phone: Fax: Date: Description Gross weight: Shipping volume: Sales region: - Value 43.4 lb 2.08 ft³ Namreg Printed from Grundfos CAPS [2011.05.
PAGE 5
Company name: Created by: Phone: Fax: Date: - 96402708 UPS 32-80 F 60 Hz 2 1/4" 1 13/16" 1 7/16" 2 9/16" 3 9/16" 4 5/8" 5/8" 11" 9 1/16" 5 9/16" 5 3/8" NPT 1/4 2 11/16" 11 3/4" M12 3" 3 3/16" 3" 5 1/2" Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 3 4 Printed from Grundfos CAPS [2011.05.