Brochure

Applications
UP Series
24
Variable-speed pump
The Grundfos variable-speed pump is another product
with fully integrated control. The variable-speed
controller requires a 0-10/2-10 DC or 0-20/4-20 mA
control signal, which is user-selectable.
If desired, the manual-% dial allows the speed of the
pump to be manually adjusted and set by the user. The
speed of the pump may be manually adjusted anywhere
from min. to 100 %, but once set, remains fixed at that
speed.
In addition, the pump speed may be set as 0-100 % or
15-100 % by user.
The control also provides pump exercising for
10 seconds every 3 days and a power-up reset, which
runs the pump for 3 seconds at full speed, for all modes
of operation.
LEDs on the terminal box indicate operation (power is
applied) and performance (flashes slower or faster).
Fig. 5 Variable-speed pump
Variable-speed models include the following
Pump with integrated variable-speed control
6-foot line cord
Two gaskets.
Variable-speed standard features
Variable-speed output modulation (external or
manual control)
Offset-dial for fine-tuning of the signal input.
Fig. 6 Family curves for variable-speed pumps
TM03 9088 3307
Signal type Signal range
Voltage 0-10 VDC or 2-10 VDC
Current 0-20 mA or 4-20 mA
TM03 8843 2607
Position System type Description
a - Min. curve for all models
b Open Max. UP 15-42F/VS
c Open Max. UP 26-64F/VS
d Closed Max. UP 26-96F/VS
0 4 8 12 16 20 24 28 32 36
Q [US GPM]
0
4
8
12
16
20
24
28
32
[ft]
H
a
d
c
b
UPSeries.book Page 24 Tuesday, September 18, 2007 1:01 PM