Installation & Assembly

FULL/ QUEEN SIZE

ASSEMBLY INSTRUCTIONS

PARTS AND FITTING PACKAGING DETAIL

BOX #1

A. HEADBOARD 1 PC C. SIDERAIL 2 PCS

D. BED SLAT 5 PCS

E. LEG SUPPORT 5 PCS

BOX #2

B. FOOTBOARD 1 PC

ADLER BED ASSEMBLED

FIX ONE OF THE SIDERAILS (C) TO THE

HEADBOARD (A) USING PHILLIPS HEAD

BOLTS (1) AND WASHERS (2).

DO NOT TIGHTEN BOLTS COMPLETELY

UNTIL ASSEMBLY IS COMPLETED.

STEP 1 :

HARDWARE PACKED IN BOX #2

HARDWARE BOX*

YOUR BOX

MAY CONTAIN

EXTRA HARDWARE

TOOL REQUIRED :

PHILLIPS HEAD SCREW

DRIVER (NOT PROVIDED)

PHILLIPS HEAD

BOLT 20MM

PCS

ALLEN BOLT

40MM

PCS

WASHER

8MM

WOOD SCREW

Ø8X30MM

PCS

ALLEN KEY

BED

PAGE 1
BED FULL/ QUEEN SIZE ASSEMBLY INSTRUCTIONS PARTS AND FITTING PACKAGING DETAIL BOX #1 BOX #2 A. HEADBOARD B. FOOTBOARD 1 PC 1 PC C. SIDERAIL D. BED SLAT E.
PAGE 2
STEP 2 : STEP 3 : FIX THE OTHER END OF THE SIDERAIL (C) TO THE FOOTBOARD (B). REPEAT THE SAME WAY FIX THE OTHER SIDERAIL (C) TO THE HEADBOARD (A) AND FOOTBOARD (B). A A C C C B B STEP 4 : STEP 5 : FOLLOW THE ILLUSTRATION TO PLACE FIVE BED SLATS (D) ON THE BED FRAME AND THE BED SLATS (D) USING WOOD SCREWS (4). USE THE PILOT HOLES ON THE SIDERAILS (C) AS YOUR REFERENCE FOR EASY ASSEMBLY. FOLLOW THE ILLUSTRATION TO FIX THE LEG SUPPORT (E) TO BED SLATS (D) USING ALLEN BOLTS (3).