Use and Care Manual

ManualsBrandsGreenworks ManualsPower Tools24-Volt Brushless Reciprocating Saw (Tool Only)

Wood cutting

1. Before cutting any type of wood, be sure the work piece

is firmly anchored or clamped to prevent slipping.

2. Place blade and shoe lightly against work to be cut.

3. Switch on saw motor before applying pressure.

Metal cutting

1. In thin gauge sheet metals it is best to clamp wood to the

underside of the sheet. This will ensure a clean cut

without excess vibration or tearing of metal.

2. Avoid forcing cutting blade as this reduces blade life and

causes costly blade breakage.

Pocket cutting

1. Measure the surface area to be cut and mark clearly with

a pencil, chalk or scriber.

2. Insert blade in blade clamp and tighten blade clamp

securely.

3. Tip the saw backward until the bottom edge of the shoe is

resting on the work surface.

4. Switch motor on, permitting blade to attain maximum

speed.

5. Grip handle steadily and begin a slow, deliberate upward

swing with the handle of the saw.

6. The blade will begin to feed into material. Always be sure

blade is completely through material before continuing

with pocket cut.

WARNING

Always hold saw firmly with both hands while cutting.

Whenever possible, the shoe must be held firmly against the

material being cut. This will prevent the saw from jumping

or vibrating and minimize blade breakage..

8 MAINTENANCE

CAUTION

Do not let brake fluids, gasoline, petroleum-based materials

touch the plastic parts. Chemicals can cause damage to the

plastic, and make the plastic unserviceable.

CAUTION

Do not use strong solvents or detergents on the plastic

housing or components.

WARNING

Remove the battery pack from the machine before

maintenance.

8.1 CLEAN THE MACHINE

CAUTION

The machine must be dry. Humidity can cause risks of

electrical shocks.

• Clear the unwanted material out of the air vent with a

vacuum cleaner.

• Do not spray the air vent or put the air vent in solvents.

• Clean the housing and the plastic components with a

moist and soft cloth.

9 TECHNICAL DATA

Voltage 24 V

No load speed 0 - 2700 min

-1

Stroke length 1.1 " (28 mm)

Weight without battery 6.04 lbs (2.74 kg)

Battery model BAG708 and other BAG ser-

ies

Charger model CAG801 and other CAG ser-

ies

The recommended ambient temperature range:

Item

Temperature

Appliance storage tempera-

ture range

32°F (0°C) - 113°F (45°C)

Appliance operation temper-

ature range

32°F (0°C) - 113°F (45°C)

English