Instructions / Assembly
MODEL#
RCPB1146H2
NOMINAL DIMENSIONS:
46" Long x 11" Wide x 7" High
PATENT PENDING
EXACT OVERALL OUTSIDE:
45⁄" Long x 10⁄" Wide x 6⁄" High
INSIDE PLANTING AREA:
42⁄" Long x 9" Wide x 5⁄" Deep
PACKAGE CONTENTS
Begin by placing two Routed Side
Boards parallel to each other with the
horizontal routing on the bottom.
Place two Routed Side Boards parallel to
each other with the horizontal routing on the
bottom. Next, slide the Dovetail Connector
Board between them until it is positioned in the
middle. The Dovetail Connector Board holds
the Top Layer together.
Slide thirteen Dovetail Bottom Boards
into the routed edges of the Routed Side
Boards to complete the floor. Make sure
to leave small gaps between the Dovetail
Bottom Boards for drainage.
SLIDE
SLIDE
Slide the Top Layer over the ends of the
Dovetail Bottom Boards to connect it with
the Bottom Layer.
Once the floor is built - insert the
last two Dovetail Bottom Boards
into the Routed Side Boards.
Lastly, insert the Dovetail Top Boards into
the Routed Side Boards. Plant and enjoy!
1.
START BY BUILDING THE
PLANTER FRAME
4.
BUILD THE TOP LAYER
2.
BUILD THE FLOOR
6.
COMPLETE THE
PLANTER
3.
COMPLETE THE
BOTTOM LAYER
SLIDE
SLIDE
SLIDE
SLIDE
DOVETAIL TOP BOARDS /
DOVETAIL CONNECTOR BOARD
10" Long x 2⁄" High x ⁄" Thick
x
ROUTED SIDE BOARDS
45⁄" Long x 3⁄" High x ⁄" Thick
x
DOVETAIL BOTTOM BOARDS
10" Long x 3⁄" High x ⁄" Thick
x
SLIDE
SLIDE
SMALL GAPS
FOR DRAINAGE
Questions? Email info@greenesfence.com or call 800-622-5510 Monday - Friday 9am-5pm EST
THE CEDAR PLANTER ASSEMBLY INSTRUCTIONS
If staining or painting the planter box do so after assembly
5.
CONNECT THE TOP LAYER
TO THE BOTTOM LAYER