Owner's manual

Install the Main Landing Gear

❏ ❏

1. Locate the ﬁ berglass left main landing gear by

ﬁ tting the main gear in the recess in the left wing. If a glow

engine will be installed, fuelproof the main landing gear

recess with thin CA or epoxy thinned with denatured alcohol.

❏ ❏

2. File a 1/4" [6.3mm] long ﬂ at spot on the end of the

main landing gear axle.

❏ ❏

3. Insert the axle through the main landing gear and

the left wheel pant. Slide an axle nut onto the axle followed

by a 2" [51mm] foam wheel. Tighten the axle nut on the axle.

❏ ❏

4. Apply a drop of thread locker to the threads of a

6-32 x 1/4" [6mm] socket head cap screw. Slide a 4mm

wheel collar onto the axle. Thread the 6-32 x 1/4" [6mm]

socket head cap screw into the wheel collar and tighten it on

the ﬂ at at the end of the axle.

❏ ❏

5. Apply a drop of thread locker to the threads of four

6-32 x 1/2" [12.7mm] socket head cap screws. Secure the

main landing gear to the wing with the cap head screws.

❏ ❏

6. Use epoxy to glue the nylon wing dowel in the root

of the wing. Position the dowel so that 1/2" [12.7mm] of the

dowel is protruding from the wing.

❏ ❏

7. Go back to step 1 of Install The Main Landing Gear

and install the right main landing gear.