User's Manual

ManualsBrandsGraupner ManualsElectronicsComputerSystem Graupner HoTT

Detail program description - Base setup model | Helicopter

Before programming speciﬁ c parameters, there are

some basic settings to be made which effect the

currently active model memory. Select the "Base setup

model " menu with the arrow keys of the left or right

touch pad then press the center

SET button in the right

touch pad.

Helicopter type

Suppress models

Base setup model

Servo adjustment

Control adjust

Stick mode.

Model name

Mod.name

Stick mode

RF BIND

n/a

BASIC SETTINGS, MODEL

n/a

BD2

BD1

RF transmit OFF

Change to the next screen page by brieﬂ y pressing

the

SET button in the right touch pad. This will open

a screen of characters for entry of the model's name.

A maximum of 9 characters can be used to specify a

model name.

!"#$%&’()+,–./012

3456789:;

Mod Name

STARL

FGHIJKL MNOPQRSTUVWX

YZ[¥]^_`abcdefghijk

?@ABCDE

Select the desired characters with the arrow keys of the

left touch pad. Move to select the next character position

by pressing the f arrow key of the right touch pad or its

center

SET button Simultaneously pressing on the cd

or ef keys of the right touch pad (CLEAR) will place a

space character at the position.

Positioning to any character position within the entry ﬁ eld

can be done with the ef keys of the right touch pad.

A return to the previous menu screen is accomplished

by pressing the center

ESC button in the left touch pad.

A model name entered in this manner will appear in the

base screen of the "Model select" menu and in the sub-

menus of the "Copy / Erase" menu item.

Stick mode

"MODE 2" (throttle left)

"MODE 3" (throttle right)

"MODE 4" (throttle left)

"MODE 1" (throttle left)

TS-Nick

Ta il

Nick

Ta il

Motor/Pitch

Roll

Motor/Pitch

Ta il

Motor/Pitch Motor/Pitch

Nick

Roll

Nick

Roll

Motor/Pitch

Ta il

Motor/Pitch

Roll

Nick

Ta il

Basically there are four different ways to assign the

four helicopter control functions, roll, nick, tail rotor and

throttle/pitch to the two joysticks. Just which of these

is used depends on the preferences of the individual

model pilot.

Use the cd arrow keys of the left or right touch pad

to select the "Stick mode" line. The option ﬁ eld will be

framed.

SEL

STARLET

Mod.name

Stick mode

RF BIND

n/a

BASIC SETTINGS, MODEL

n/a

RF transmit

OFF

Press the

SET button. The currently displayed stick

mode will be displayed in inverse video. Now use the

arrow keys of the right touch pad to select from among

options 1 through 4.

Pressing simultaneously on the cd or ef k

eys of the

right touch pad (CLEAR) will return the option selection

back to stick mode "1".

Pressing the

SET button again will deactivate option

selection so that y

ou can change to another line

Bound

receiver

aupner

-HoTT receiv

ers m

ust be "instr

ucted " to

comm

unicate e

xclusiv

ely with one par

ticular model

(memor

y) in a

aupner

-HoTT transmitter. This

procedure is known as "binding" and must only be done

once for every new receiver/model memory location

combination (and can be repeated anytime).

Important notice:

During the binding procedure be sure the

transmitter's antenna is always far enough away

from the receiver's antenna. To be on the safe side,

keep them at least one meter apart. Otherwise you

run the risk of a faulty connection to the return

channel and malfunctions will result.

"Binding" multiple receivers per model

Multiple receivers per model can be bound if desired,

Base setup model

Model-speciﬁ c base settings for helicopter models