User's Manual

265

Detail program description - Control adjust

of mixture speciﬁ ed for the example compensates

directly for the FL-pos. setting, whereas …

… in the other limit position, AIL and FL reach the •

maximum downward offset prescribed by the mixer

percentage.

In order to set a – corrective – admix for the elevator, exit

the "Multi-ﬂ ap menu" and return to the base screen of

the "Wing mixers" menu:

Brake settings

WING MIXERS

FL EL +5%+5%

–––

Multi-flap menu

Thermal

In the two limit positions of the three-stage switch the

elevator is moved symmetrically in this example with

+5 % (true to side). If, on the other hand, you use a

proportional rotary control, the elevator is deﬂ ected

according to the degree for the control position.

Then make the settings for the "Speed" ﬂ ight phase in

the same manner.

Notice:

The digital trimming of transverse, altitude and side •

work independently of these settings – depending on

the setting selected in the "Joystick setting" menu,

page 92 – "Global" or for each "Phase".

All setting values are model-dependent. Carry out •

the settings on your ﬁ nished model and/or during the

ﬂ ight.