User's Manual

17 / 20
34001_HB_V1
Free mixers
Note
If you have already programmed mixer functions in the “Wing mix-
ers” or “Free mixers” menu of your HoTT transmitter, you must ensure
that those mixers do not overlap with those available in this menu!
MIXER:
Up to five mixers can be contemporaneously programmed. You
can switch between Mixer 1, Mixer 2, … and mixer 5 in the
“Mixer” line.
The following settings only affect the mixer selected in this line.
FROM CHANNEL:
The signal source (or source channel) is mixed in to the target
channel (TO CHANNEL) with a programmable amount. The
method of setting up the values is analogous to the “Free mix-
ers” menu in HoTT transmitters.
Flying, assembling and experimenting with the Vector Unit
Ground ideas
The Vector Unit has been conceived for simple airplane models,
which are basically made as free-flight models.
With the unit also launch gliders or models which have not been
produced for flying as remote controlled models can be con-
trolled, they just have not to be heavier than 50 g.
 Foam launch gliders.
 Rubber motor models.
 Small balsa models.
 Everything which an RC model fan can conceive
FREE MIXER < >
>MIXER: 1
FROM CHANNEL: 1
TO CHANNEL: 6
TRIM: +0%
TRV - : +100%
TRV + : +100%