Installation Guide

TopTile
Mounting System
24 of 27
Landscape Panel Configuration:
The TopTile Mount System conveniently accommodates landscape configurations to minimize roof time
and parts required. The system is tested by IAPMO, UL 1703 compliant for Class-A Fire Rated for Type
1 and 2 PV Modules and UL 2703 compliant for electrical bonding tested by ETL.
Proceed with the mounting of the PV panels using the Mid and End Clamps. Specific mounting
instructions are shown in the following section for landscape mounting. Mid Clamps are used between
PV panels, they will produce 1/2” spacing between PV panel frames. End Clamps are used to secure PV
panels at the ends of a row. Note that the PV panels are clamped on the long edges as required by most
manufacturers.