User's Manual

2D:4>6C:42?#65:42=&C@5F4ED25:G:D:@?@762=E9&C@5F4ED?4K#2EC:IK(,#2?F2= &
1. All Half Rails (#1) mount to the bed in a similar fashion. Left or right
designations are based on the patient’s orientation as he/she lies in
the bed.
2. Insert the two Clevis Pins, with Circle Cotter and Lanyard Cable (#2),
into the two Half Rail arms as shown.
3. Attach the Half Rail to the bed frame brace by aligning the arms
and Clevis Pins to the holes on the brace. Slide the Clevis Pins so
that they extend past the brace on the underside of the bed.
4. Insert the two Hair Pin Clips (#3) into the holes in the Clevis Pins
to secure the rail to the bed.
5. IMPORTANT: Lubricate all pivot joints as needed. Aerosol White
Lithium Grease is recommended.
6. TO OPERATE: Depress the Release Trigger to lower or raise the
half rail assembly.
ccessory Assembly - Head & Foot Half Rails
A
WARNING: The mattress support platform should always be placed in the flat position when not attended.
When assessing the Risk for Entrapment, you need to consider your bed, mattress, head- and footboards, half rails, assist bars,
and other accessories as an entire system. All bed systems are evaluated for compliance to the FDA/CDRH “Hospital Bed
System Dimensional and Assessment Guidance to Reduce Entrapment” guidelines.
A resident/patient’s condition could lead to resident/patient entrapment. It is extremely important to review the resident/patient’s
physical and mental condition, and initiate an appropriate individual care plan to address any entrapment risks.
!
$%*
(6=62D6*C:886C:D
=@42E652EE9:D6?5
Head-End Half Rail KIT: ZA78400
?4=F56D&2CEL"67E):562?5
&2CE(:89E):56A=FD92C5H2C6328

"67E
(:89E
%%*
Item # Qty. Part # Description
1 1 999-0784-908G
Head-End Half Rail: Left-Hand Side - 76”
Head-End Half Rail: Left-Hand Side - 80”
Foot-End Half Rail: Right-Hand Side - 80” Only (Not shown)
1 1 999-0794-908G Foot-End Half Rail: Right-Hand Side - 76” Only (Not shown)
1 1 999-0784-907G
Foot-End Half Rail: Left-Hand Side - 80” Only (Pg. 18)
Head-End Half Rail: Right-Hand Side - 76” (Not shown)
Head-End Half Rail: Right-Hand Side - 80” (Not shown)
1 1 999-0794-907G Foot-End Half Rail: Left Hand Side - 76” Only (Pg. 18)
2 2 999-0784-100
Clevis Pin - 16mm. Dia. x 105mm. w/cross-hole,
circle cotter, lanyard cable (LBK-3-06)
and Hair Pin Clip
NO SPECIAL Tools REQUIRED
"*"("
)%-$

 "