Installation & Assembly

Table Of Contents

Tools List (Not included)

Spirit LevelTape Measure

Silicone

Use a spirit level to ensure the vanity is level from left to right and front to back, adjust

if needed.

Step 1

Step 3

Apply silicone sealant evenly along the bottom of backsplash and wall. Backsplash

not included and must be purchased separately.

Backsplash sold separately.

Step 2

Attach the counter top onto the vanity with silicone sealant applied to top of front and

side vanity edges.

Do not over apply. Allow to dry for 24 hours for proper curing.

NOTE: SINK STYLE, SHAPE, FAUCET HOLES, CUTOUT ON TOP, VANITY MAY VARY FROM THE PICTURE ABOVE.

INSTRUCTIONAL PURPOSE ONLY.

Place backsplash on the surface of the counter with the siliconed side down. Check

for alignment and let it dry for 24 hours.

Skip this step if backsplash was not purchased.

Step 4

CARE AND CLEANING

For best results in caring for your stone top, we suggest:

- Always wipe off spills immediately.

- Seal the stone top regularly with a good quality stone sealant.

- Never use strong or abrasive cleaner, and always test your cleaning solution on unnoticeable areas before applying to the entire surface.

- Wipe surface clean, immediately after applying cleaner.

- Do not allow cleaner to sit or soak. Never let cleaner sit on the surface of the stone for long periods of time.

- Use a soft, dampened sponge and cloth. Never use an abrasive material such as brush or scouring pad to clean surface.

They will scratch the surface of the stone top and lavatory

- Always rinse and wipe clean the fixtures to prevent soap buildup.

take out the

drawer box

lift up the

drawer box

pull out the

locking pin

pull out drawer

INSTALLATION

TIPS:

(Counter top sold separately)

Professional installation is recommended.