Assembly Instructions Caution : You must read this before you proceed Extension Table CAUTION : This table is NOT a TOY. Keep your child / children at bay in the process of assembly.
Label Picture Description QTY ① Bolt(M6*22mm) 22 ② Washer(6mm) 31 ③ Spring Washer(6mm) 27 ④ Bolt(M6*80mm) 3 ⑤ Nut(6mm) 3 ⑥ Spanner 2 Before Beginn ing Assem bly: Page 2 OF 7
Overview Table Top Extension Leaf Outer Table Leg with Preattached Leveller (D) Table Top(A) Inner Table Leg with Preattached Leveller(C) FRONT FACING This table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 ⑥ D ②③ ① ④ ② ②③⑤ ②③① C Fix the Inner Table Leg with Pre-attached Leveller(C) and Outer Table Leg with Pre-attached Leveller(D) with bolts(④), washers(②), spring washers(③) and nuts(⑤) by spanner(⑥). Do not over tighten. Fix the bolts(①), washers(②), spring washers(③) to the unit by spanner(⑥). Do not over tighten. Step 3 ⑥ D ②③ ① ④ ② ②③⑤ ②③① C Repeat the same assembly process for the other Inner Table Legwith Pre-attached Leveller(C) and Outer Table Leg with PreattachedLeveller(D).
Step 4 ① ③ ⑥ ② Table Leg A(Table Top) Turn the table upside down on to a soft surface that does not scratch the tabletop. Attach Inner Table Leg with Pre-attached Leveller(C) and Outer Table Leg with Pre-attached Leveller(D) to the mounting position on the table top(A) with bolts(①), spring washers(③) and washers(②) by spanner(⑥). Do not over tighten. Caution: you may need 2 adults to turn the table top A upside down. Step 5 Adjust height for balance Adjust low for balance Turn the Table rightside up.
Step6 B To expand the Table, pull the table top apart, place Table Top Extension Leaf (B) into the middle leaf slot. Adjust the direction/angle to tightly fit into the housing in the Table Top. Step 7 B To shorten the Table, pull the table top apart, take Table Top Extension Leaf(B) away, then towards the table top. Your table is ready to use.
Page 7 OF 7
