User Manual

WaveAce

WA-GSM-E-RevA

Updating the System Software

System software updates are downloaded through the USB memory port in

the front of the oscilloscope.

1. Insert the USB memory device containing the software update in the

USB port on the front of the scope.

2. Press the front panel Utility button.

3. Press the Next Page menu option button to navigate to menu page

3/3. Select the Update Firmware menu option button as follows:

Note: WaveAce reminds you to verify the firmware product type

matches the instrument. Also, to verify the firmware update file is

stored in the root directory of the USB memory device.

Now, press the SINGLE front panel button to begin updating the

firmware or the RUN/STOP front panel button to exit.