User Manual

WaveAce
60
WA-GSM-E-RevA
Utility Menu- Page 3/3
Press the Update Firmware option button to update the
oscilloscope using the USB memory device. For more
information, see the Updating the System Software section.
Press the Pass/Fail option button to monitor changes of signals
and output pass or fail signals by judging whether the input
signal is within the predefined mask.
Press the Record option button to record the input waveform
from CH1 and CH2, with a maximum record length of 2500
frames. You can record the pass/fail test output, which is
especially useful when capturing abnormal signals over a long
period of time without having to watch the signal. You set the
source, the time interval between record frames, and the
maximum number of record frames.
Press the IO Setting option button to set up the band rate (300,
2400, 4800, 9600, 19200, 38400).
Press the Next Page option button to display page 1/3.