User Manual

Getting Started Manual
WA-GSM-E-RevA
25
Trig'd - The oscilloscope has found a trigger and is acquiring the
post-trigger data.
Stop - The oscilloscope has stopped acquiring waveform data.
Acq. Complete - The oscilloscope has completed a Single
Sequence acquisition.
Auto - The oscilloscope is in Auto Mode and is acquiring waveforms
in the absence of triggers.
Scan - The oscilloscope is acquiring and displaying waveform data
continuously in Scan Mode.
5
Acquisition Sampling Mode
Sample Mode
Peak Detect Mode
Average Mode
6
Horizontal Trigger Position Readout - Displays the waveform's
horizontal position in time (seconds).
7
Horizontal Trigger Position Marker - Shows the horizontal trigger
position.
8
Display Markers (Zero Volts Level) - Show the ground reference points
of the displayed waveforms. If there is no marker, the channel is not
displayed.
9
Display Signal Source
10
Signal Coupling symbol
11
Volts/Division
12
Indicates whether the bandwidth limiting filter is On or Off. The "B" icon
indicates that the filter is On.
13
Main timebase setting (Note that a Window timebase setting is also
displayed if applicable)
14
Trigger Source
15
Frequency Counter of Trigger Signal
16
Trigger Type and level indicator