Learning Thermostat Installation Guide ™
WE TAKE YOUR PRIVACY SERIOUSLY We’re committed to being open and honest about how we use data. We’ll always ask for permission before sharing personally identifiable information like your email address, and we keep your data safe with industry standard security tools. To learn more about our Privacy Policy, go to nest.
Compatibility Based on Nest’s online compatibility checker data, the Nest Thermostat works with most 24V systems, including gas, electric, oil, forced air, variable speed, heat pump, and radiant.
Contents Display Base Screwdriver Wall screws Optional trim plate Optional steel plate Optional steel plate screws
1. Switch off power 2. Remove cover This protects you and avoids blowing a fuse in your equipment. Adjust the temperature on your old thermostat to make sure your system is off. Some covers pop off, while others need to be unscrewed. Breaker box Switch 3. Check your system 4. Remove any jumper wires If your old thermostat is labeled 120V or 240V or has thick wires with wire nuts, your system is high voltage. Not sure? Contact support. Jumper wires are short wires between two connectors.
5. Label wires Peel off the labels below and attach them to the thermostat's matching wires. Use the white labels for any W3, E, HUM or DEHUM wires. The* connector can only connect to one of these wires. See two names for each connector on your old thermostat's backplate? Visit nest.com/2labels for help. Two labels m Tip: Take a picture of the w1res on your old thermostat to help you remember. 6.
Optional in most homes Use trim plate if needed You can cover up holes or marks left by your old thermostat with the optional trim plate. Snap the base and trim plate together, then screw them to the wall. You’ll find the trim plate in the bottom of the box. Optional in most homes Mounting on an electrical box Electrical boxes aren’t common, but if you have one, secure the steel plate to the electrical box with two of the short steel plate screws. Insert the screws into the long slots on the steel plate.
. Attach the Nest base 9. Connect wires Pull the wires through the center of the base, then attach it to the wall with the screws. After all the wires are securely connected, push them down to make sure they’re flush with the base. 3/8 in The exposed wire should be straight. 10. Attach the display 11. Switch the power back on Press the display onto the base until it clicks.
12. Setup and Nest Account The Nest Thermostat will turn on and walk you through setup. Just turn the ring and press to select. During setup, you can connect the thermostat to Wi-Fi. Go to nest.com/account or download the Nest app to create a Nest Account. The app will show you how to connect your Nest Account and thermostat. Remember, you can download the free Nest app from the iTunes App Store™ or Google Play.™ Questions about adding a thermostat to your Nest Account? Visit nest.
Nest Labs, Inc. Limited Warranty Learning Thermostat™ For more information, visit nest.com You can also find answers in the Nest Community at nest.com/community For FCC Compliance Statement, visit nest.com/legal/fcc-compliance-notice THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. 1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Nest Labs, Inc.
(defined below). Nest Labs will bear all costs of return shipping to owner and will reimburse any shipping costs incurred by the owner, except with respect to any Ineligible Product, for which owner will bear all shipping costs. 4.
Meet the Nest Learning Thermostat. Display Turns blue when coolin ng and orange when heating. g. Status Shows Time-too Temp and if it’s heating, g coolin ng or using g Airwave. Current temperature Shows the temperature in yourr home. Target temperature re Shows the temperature you want to reach. Nest Leaf Appears when you ou’re saving energy. Sensor win indo ow Contai a ns tempe era ratu ure re, humiidity ty, li ligh g t an and d activi vitty sen enso sors r . Welcome home. Get to know each other.
Your life with Nest. 3:00 Teach it well The Nest Thermostat learns from you. Just change the temperature when you wake up, go to bed, leave the house and come home. After a few days, Nest will do it for you. Install and setup During setup, tell Nest what system you have, and System Match will turn on specific features to keep you comfortable and help you save. Go to nest.com/support if you need help. Day 1 Nest Leaf The Leaf appears when you choose a temperature that saves energy.