User's Manual

11
Slave: Automatically play programs in sync with the host.
gSync Group: Can be set to 0~255.
gSync Mode: 0ˈ1ˈ2ˈ3ˈ4ˈ5ˈ999 seven modes.
0: The host sends a sync signal at the beginning of each clip.
1: The host sends a sync signal every minute.
(The host sends a sync signal, which is sent only when the video starts playing, and
will not be sent during the video playback)
2: The host sends a sync signal every 2 minute
999: same as the test mode of 0,
the slave will not have an arrow synchronization
flag in the upper left corner after receiving the sync
4.1.10 Restore to Factory Setting
Press Restore to Factory Settings and you’ll be prompted with a message. Choose Yes
to have all parameters in System Settings to be restored to their factory settings.
4.1.11 Auto Start
If you enable this feature, the pre-loaded Signway digital signage player software will
start automatically after the player is turn
ed on. Otherwise, Android system will be
loaded instead.
4.2. System Control
4.2.1 Work Mode