SDS
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY
PRODUCT NAME
Organic Odor Eliminator– Vanilla Cookie
PART No.
4016
DATE
1/19/2012
SUPPLIER
NATURAL MAGIC
ADDRESS:
755 TRI STATE PKWY
GURNEE, IL 60031
TELEPHONE:
800-328-9248
Emergency Contact:
24-Hour Number: 1-800-535-5053
International: 1-352-323-3500
2. COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME
CAS No.
WT %
Ethanol 64-17-5 1-5
Propylene Glycol 57-55-6 1-5
Proprietary Fragrance Unknown 1-5
The ingredients in the balance of this product do not contribute significant hazards beyond those described in this
document. All pertinent health, safety and environmental information has been presented, per the requirements of the US
Federal OSHA Hazard Communication Standard (29CFR 1910.1200).
3. HAZARDS IDENTIFICATION
Potential Health Effects:
Eye: No adverse effects anticipated. Prolonged contact may cause irritation.
Skin: No adverse effects anticipated. Prolonged contact may cause irritation.
Ingestion: May cause gastrointestinal disturbances.
Inhalation: No adverse effects anticipated.
Chronic Effects:
Carcinogenicity: No components are listed by IARC, NTP, or OSHA as carcinogens.
4. FIRST AID MEASURES
INHALATION:
Move to fresh air.
INGESTION:
Do not induce vomiting. Rinse mouth thoroughly. Give a glass of water to drink. Get immediate
medical attention.
SKIN:
Rinse immediately with plenty water. Get medical attention if any discomfort continues.
EYES:
Immediately flush with water for 15 minutes. Get medical attention if any discomfort continues.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA:
Use extinguishing media appropriate for surrounding fire.
UNUSUAL FIRE & EXPLOSION HAZARDS:
No unusual fire or explosion hazards noted.
HAZARDOUS DECOMPOSITION PRODUCTS:
Fire creates: Carbon monoxide [CO].Carbon dioxide [CO2]
PROTECTIVE MEASURES IN FIRE:
Wear self-contained breathing apparatus and full protective clothing
to prevent any contact with skin and eyes
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS
DURING SPILL:
Wear suitable protective equipment as specified under Protective Data on this
Safety Data Sheet.
SPILL CLEANUP METHODS:
Solidified product: Scoop up solids and place in suitable containers for disposal.
Melted product: Allow to solidify and treat as above. Solution: Absorb in vermiculite,
dry sand or earth and place in appropriate containers.