Installation Guide

Owner’s Manual

Freestanding Tub Filler

Office: +1 (888) 808-0450

Email: help@akdyusa.com

Distributed by akdyusa.com

Manufactured by AKDY

FOR RESIDENTIAL USE ONLY IN US & CA

WARRANTY VOID OUTSIDE US & CA

Revised 11/16

PAGE 2
Tools Required & Parts List Tools Required Tub Filler Parts List The following tools are recommended for installation:  Screwdriver  Adjustable wrench  Teflon tape  Drill  Hole saw Your tub filler comes preassembled ready for installation. A parts list is given if you require replacement parts: 1. Spout 2. Faucet 3. Cartridge 4. Handle 5. Post 6. Floor cap 7. Screws 8. Mounting bracket 9. Water supply lines 10. Flexible hose 11. Handheld shower (Picture shown may vary from the product.
PAGE 3
Tub Filler Installation General Installation Sub Floor Installation Steps given are for general installation only. If you require assistance, please contact a plumber. 1. Take the included mounting bracket and mark the location of the screw holes. 2. Use a drill to prepare the floor for mounting. 3. Secure the mounting bracket to the floor with the included screws. 4. Use Teflon tape for the hot and cold water lines 5. Connect your water lines. 6. Check for leaks.