wn ASSEMBLY INSTRUCTIONS TWIN BED WITH STAIR , BLACK BOARD , FULL LOWER BED IMPORTANT NOTE PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO AVOID THE PARTS FROM BEING SCRATCHED BEFORE YOU BEGIN, KINDLY FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP DO NOT TIGHTEN ALL SCREWS AND BOLTS UNTIL THE BED IS FULLY SET-UP WF290952/WF290953
/\ SAFETY WARNING /N\ 1. This bed is designed for use only mattresses) meeting the following specifications on the upper bunk , and lower bunk : Upper bunk (bunk bed and tribes included) Bed type Length Width Thickness Twin standard 74" -75" 38 1/2" 6" Max Lower bunk Bed type Length Width Thickness Full standard Max 2. Replacement parts, including additional guardrails, maybe obtained from any of our (CLOUDED TECHNOLOGY(USA) INC. 18961 ARE NTH A VENUE CITY OF INDUSTRY, CA, 81748) dealers 3.
Part list BOX : WF290952 Headboard rail {2 pcs) C3 SN Headboard rail Headboard rail (1 pc) Headboard rail (1 pc) C5 Headboard rail Bed slats (7 pcs) C7 ~~ Bed slats (13 pcs) Standing song (2 pcs) cs Standing song Support bar (3 pcs) T7 Su Support bar (3 pcs) Support bar (3 pcs) T8 Support bar Top rail 1pc D3 Top rail 1pc Top rail 1pc Page 4
Part list BOX : WF290952 D4 Top rail 1pc D6 Plank Plank Plank Pillar balcony 1 pc Pillar balcony Rail balcony stair 3 pcs T4 Pillar balcony Rail (2 pcs) Page 5
Part list BOX : 290953 C6 = Written version 1 pc D10 Paneling 2 pcs P 3 Connecting bar 14 pcs v1 C front drawer 3 pcs V2 So stair surface Side stair 3 right Side stair 3 left stair surface Side stair 2 right Side stair 2 left stair surface Side stair 1 right ( 1 pc} V10 N Side stair 1 left (1 pc) V11 <> stair surface V12 } Back panel stair Headboard rail (5 pcs) Page 6
Hardware list in WF290952 Wood screws 16 pcs 120 Hex head bolts 3 pcs Hex head bolts 5 pes Hex head bolts 49 pcs Horizontal-hole bolt 59 pes 28x30 x12 M86 x 30 mm Wood dowel 46 pcs Wood screws 102 pcs Wood screws 20 pcs Hex head bolts 20 pcs Hex head bolts 13 pcs Allen key 1 pc Steel dowel 6 pcs magnet set 3 pcs 13 Mé6 x 30 Assemble tools required (Not included) Page 7
Note: Part 4 will face up with the "x" mark otherwise it cannot be tightened Heat rc bolt Hox oad bots | Fes head bots apes 1p 1pe Page 8
Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened M86 x 120 mm Horizontal-hole bolt | Hex head bolts Hex head bolts 4 pes PCs 2 pes Page 9
a Vv SPT KR Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened mmm 28x30 Hex head bolts Horizontal-hole bolt | Wood dowel 18 pcs 15 pce 15 pcs Page 10
Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened INS Hex head bolts Horizontal-hole bolt | Wood sows! 6 pcs 10 pcs 10 pes Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened Step 28x30 Horizontal-hole bolt | Wood dowel 4 pcs 8 pes Page 11
Steppe edge the trundle slats, you need to leave a certain space at the Note: Do not lock the screws of the trundle slats to te outermost edges, otherwise it will cause the board to break 12 pcs Hex head bolts | Wood screws pcs Page 13
Note: Do not lock the screws of the trundle slats to te outermost edge the trundle slats, you need to leave a certain space at the edges, otherwise it will cause the board to break Om & Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened Hex head Horizontal-hole | Wood dowel 4 pecs bolt 4 pes Steppe Page 14
Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened [eo] Hex head Hex head bolts | Horizontal-hole bolts 3 pcs 3 pes bolt 3 pcs Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened E]] [4] 3] Comm MEx 13mm |28x30 Hex head Horizontal-hole | Wood dowel bolt 8 pcs 8 pos Hex head bolts 6 pcs
Steppe GRE Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened Steppe Hex head bx Apes Jv 5 Z.
