User's Manual

GO MBW Getting Started Guide
GO MBW Getting Started GuideGO MBW Getting Started Guide
GO MBW Getting Started Guide
Draft Version - Confidential - Page 9
WNC Safety Information
Be careful when attempting to lift the equipment. This equipment is designed for
installation in a suitable environment with free airflow. Do not block any air vents in
the rear panel or on the sides. There are no air vents on the top or bottom of the
unit. However, liquids of any type (water, coffee, etc.) should not be placed on or
near the unit.
Electrical Safety
It is highly recommended that this equipment be connected to a suitable,
uninterruptible power supply unit (UPS).
Before connecting main leads to the units, check that the power cords(s), plug(s)
and distribution sockets are in good condition.
Take all necessary precautions when working with disassembled units while they are
still under power.
Electro-Static Discharge Precautions (ESD)
Take all necessary precautions when handling printed circuit boards, as all parts in
the server are prone to ESD damage.
Use wrist straps that are suitably earthed when removing any parts from the
systems.
Redundant Power Supply
WNC units that run on AC power have the option of using a redundant power supply.
This option is only available for AC.
CAUTION. When installing the unit, remember that there is a risk of electric
shock.
If you only disconnect one power cord, the danger of hazardous voltage from the
unit remains a possibility. Disconnect both power cords to remove the risk of
hazardous voltage from the unit.