User's Manual

Bluetooth GPS Receiver User Manual
-12-
14) You will see the shortcut you just created：
5.3. Configuration setup with PDA connection
Following will show how to configure the Bluetooth connection on PDA. It may be
different from other PDA models.
1) Power on your PDA and the Bluetooth host.
2) Power on the GPS Receiver. If the battery is ready, you should see 2 LEDs indication：
the blue for Bluetooth blinks 3 times/sec. It means the Bluetooth module is activated and
waiting for connection. The green LED for GPS, means the GPS module is activated and
is inquiring GPS signal.
Green LED continuously lights up
Blue LED blinks 3 times/sec