User Manual

6
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point
Model: WL AP 2454 MN1
GST Confidential
2. Getting Start with Access Point
2.1 Know the 54Mbps Wireless Network Access Point
Ports:
● Power Receptor
● Reset Button
● RJ-45 Ethernet Port
Cross-over cable is required to connect to computer directly
LEDs:
● Power LED: ON when the unit is powered up
● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
● WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.
2.2 Connect to the 54Mbps Wireless Network Access Point
Build the Infrastructure Mode
In order to setup an Infrastructure of a wireless network such as the example
shown above, user will need the following: